• 中国科技核心期刊
  • JST收录期刊
  • Scopus收录期刊
  • DOAJ收录期刊

留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

仿螃蟹水下机器人系统设计与实现

李鹏基 田钰涛 陈泽瀚 张大朋

李鹏基, 田钰涛, 陈泽瀚, 等. 仿螃蟹水下机器人系统设计与实现[J]. 水下无人系统学报, 2025, 33(5): 826-835 doi: 10.11993/j.issn.2096-3920.2025-0090
引用本文: 李鹏基, 田钰涛, 陈泽瀚, 等. 仿螃蟹水下机器人系统设计与实现[J]. 水下无人系统学报, 2025, 33(5): 826-835 doi: 10.11993/j.issn.2096-3920.2025-0090
LI Pengji, TIAN Yutao, CHEN Zehan, ZHANG Dapeng. Design and Implementation of a Crab-Like Underwater Robot System[J]. Journal of Unmanned Undersea Systems, 2025, 33(5): 826-835. doi: 10.11993/j.issn.2096-3920.2025-0090
Citation: LI Pengji, TIAN Yutao, CHEN Zehan, ZHANG Dapeng. Design and Implementation of a Crab-Like Underwater Robot System[J]. Journal of Unmanned Undersea Systems, 2025, 33(5): 826-835. doi: 10.11993/j.issn.2096-3920.2025-0090

仿螃蟹水下机器人系统设计与实现

doi: 10.11993/j.issn.2096-3920.2025-0090
基金项目: 国家自然科学基金资助项目(62272109).
详细信息
    作者简介:

    李鹏基(2005-), 男, 本科在读, 主要研究方向为船舶与海洋结构物动态响应

    通讯作者:

    张大朋(1987-), 男, 博士, 讲师, 主要研究方向为船舶与海洋结构物动态响应.

  • 中图分类号: TJ630; U663

Design and Implementation of a Crab-Like Underwater Robot System

  • 摘要: 针对水下机器人在复杂地形与强水流阻力环境下易受损、工作效率低等问题, 文中设计了一款仿螃蟹结构的水下机器人。该机器人采用仿生蟹型构型, 搭配防位移蟹腿装置, 集成磁流体推进和牺牲阳极检验装置,可降低水下作业成本并提高水下采样效率。文中设计旨在辅助油气开发的全周期提供技术支撑, 为油气管道铺设、巡检与维修提供指导建议。

     

  • 图  1  仿螃蟹水下机器人主要结构

    Figure  1.  Main structure of the crab-like underwater robot

    图  2  超导磁流体推进装置

    Figure  2.  Superconducting magnetic fluid propulsion device.

    图  3  牺牲阳极检测装置

    Figure  3.  Sacrificial anode detection device

    图  4  防位移蟹腿装置示意图

    Figure  4.  Schematic diagram of the anti-displacement crab leg device

    图  5  防位移蟹腿装置关节简图与初始状态

    Figure  5.  Joint diagram and initial state of the anti-displacement crab leg device

    图  6  防位移蟹腿前进姿态

    Figure  6.  Forward movement posture of the anti-displacement crab leg joint

    图  7  防位移蟹腿大致工作空间

    Figure  7.  Approximate workspace of the anti-displacement crab leg

    图  8  仿螃蟹水下机器人模糊CPG控制方案

    Figure  8.  Fuzzy CPG control scheme for the crab-like underwater robot

    图  9  PID控制器作用原理

    Figure  9.  The role of PID controller

    图  10  常规PID控制系统原理图

    Figure  10.  Schematic diagram of the conventional PID control system

    图  11  参数整定与优化流程设计图

    Figure  11.  Flow chart of parameter setting and optimization

    图  12  PID参数调试过程响应曲线

    Figure  12.  Response curves of PID parameter debugging process

    图  13  仿螃蟹水下机器人工作时兴波云图

    Figure  13.  Wave cloud diagram during operation of the crab-like underwater robot

    图  14  仿螃蟹水下机器人工作时压强分布

    Figure  14.  Pressure distribution during operation of the crab-like underwater robot

    图  15  仿螃蟹水下机器人示意图

    Figure  15.  Schematic diagram of the crab-like underwater robot

    表  1  仿生水下机器人运动方式对比

    Table  1.   Comparison of bionic motion modes of underwater vehicles

    名称 运动特性
    蛇形机器人 采用蜿蜒、柔性运动, 具有高机动性,
    可适应复杂环境且穿越狭隘空间。
    仿水母型机器人 能在水中移动, 能耗较低, 控制精度要求高
    仿乌贼型机械手 模拟生物运动, 具有良好的抓取能力,
    但结构设计复杂且维修难度大。
    仿螃蟹型防位移腿 稳定性强、适合复杂海底环境, 但足部
    活动空间不足且运行速度较慢。
    下载: 导出CSV

    表  2  PID参数调试过程

    Table  2.   Process of PID parameter debugging

    调试阶段 参数组合
    $ \left(K_{\mathrm{p}},K_{\mathrm{i}},T_{\mathrm{d}}\right) $
    测试现象 问题分析
    初始值 $\left( {0.5,0,0} \right)$ 响应迟缓,
    姿态偏差$ \gt 15^\circ $
    比例增益不足,
    抗干扰能力弱
    阶段1 $\left( {1.2,0,0} \right)$ 超调量达$ 25%,\ $
    剧烈振荡
    比例过强, 需微分
    抑制振荡
    阶段2 $\left( {1.0,0.02,0.1} \right)$ 稳态误差$ 8^{\circ},\ $
    恢复时间较长
    积分作用不足,
    静差未消除
    最优参数 $\left( {0.8,0.05,0.3} \right)$ 超调$ < 5%,\ $
    稳态误差$ \approx 0^\circ $
    响应快且平稳
    下载: 导出CSV

    表  3  PID最优参数

    Table  3.   Optimal PID parameters

    参数 数值 对系统的影响
    ${K_{\mathrm{p}}}$ $ 0.80 $ 快速响应姿态偏移, 提供基础驱动力
    ${K_{\mathrm{i}}}$ $0.05$ 消除静差, 抑制水流持续干扰
    ${T_{\mathrm{d}}}$ $ 0.30 $ 预测运动趋势, 抑制机械振荡
    下载: 导出CSV

    表  4  腿部设计指标与验证结果

    Table  4.   Limb performance metrics and validation results

    设计指标 目标值 验证方法 验证结果
    髋关节弯曲范围 $ 0\sim120^{\circ} $ 三维模型与
    关节设计
    达成
    膝关节弯曲范围 $ 0\sim150^{\circ} $ 三维模型与
    关节设计
    达成
    末端吸附力 $ \geqslant 15\;{\mathrm{N}}$ 理论计算与选型 达成
    管道适应范围 $ \mathit{\Phi}20\sim100\; \text{cm} $ 工作空间分析(图7) 可实现无死
    角转向
    运动平稳性 运动学模型与
    PID控制
    姿态误差$ \pm 2^\circ $
    下载: 导出CSV
  • [1] 邱志明, 马焱, 孟祥尧, 等. 水下无人装备前沿发展趋势与关键技术分析[J]. 水下无人系统学报, 2023, 31(1): 1-9.

    QIU Z M, MA Y, MENG X Y, et al. Analysis on the development trend and key technologies of unmanned underwater equipment[J]. Journal of Unmanned Undersea Systems. 2023, 31(1): 1-9.
    [2] 施先林, 张大朋, 严谨, 等. 固体力学的发展趋势、在各个领域中的应用及当前在我国存在的问题[J]. 科学咨询, 2024, 9: 122-125.

    SHI X L, ZHANG D P, YAN J, et al. Development trends, applications in various fields, and current issues in China of solid mechanics[J]. Scientific Consultation, 2024, 9: 122-125.
    [3] 王彪, 罗瑞龙, 王芳, 等. 深海无人装备控制系统研究现状与发展趋势[J]. 水下无人系统学报, 2025, 33(3): 390-399.

    WANG B, LUO R L, WANG F, et al. Research status and development trends of control systems for deep-sea unmanned equipment[J]. Journal of Unmanned Undersea Systems, 2025, 33(3): 390-399.
    [4] 张军豪, 陈英龙, 杨昕宇, 等. 刚柔耦合水下蛇形机器人的建模与控制仿真[J]. 工程科学学报, 2023, 45(12): 2095-2107.

    ZHANG J H, CHEN Y L, YANG X Y, et al. Modeling and control simulation of a rigid-flexible coupled underwater snake-like robot[J]. Chinese Journal of Engineering, 2023, 45(12): 2095-2107.
    [5] 张学海, 杨泽慧, 王汝贵, 等. 仿乌贼水下采样机械手建模与仿真[J]. 机械传动, 2024, 48(6): 58-64.

    ZHANG X H, YANG Z H, WANG R G, et al. Modeling and simulation of a squid-inspired underwater sampling manipulator[J]. Journal of Mechanical Transmission, 2024, 48(6): 58-64.
    [6] 张冬冬, 江一行, 范云杰, 等. 基于仿生水母的水下机器人结构设计与试验研究[J]. 机电工程, 2024, 41(4): 739-746.

    ZHANG D D, JIANG Y H, FAN Y J, et al. Structural design and experimental research of an underwater robot based on bionic jellyfish[J]. Journal of Mechanical & Electrical Engineering, 2024, 41(4): 739-746.
    [7] CHEN L, HU Q, ZHANG H, et al. Research on underwater motion modeling and closed-loop control of bionic undulating fin robot[J]. Ocean Engineering, 2024, 299: 11.
    [8] 曹勇, 陈刚, 李强. 基于仿生螳螂虾机器人的微型低成本沉浮系统设计与深度控制研究[J]. 海洋工程, 2025, 38(3): 251-224.

    CAO Y, CHEN G, LI Q. Design of a miniaturized low-cost sinking-floating system and depth control research based on a bionic mantis shrimp robot[J]. The Ocean Engineering, 2025, 38(3): 251-224.
    [9] 陈国军, 林羊龙, 金俊, 等. 仿生机器蝠鲼动力学建模及试验研究[J]. 水下无人系统学报, 2024, 32(1): 40-47.

    CHEN G J, LIN Y L, JIN J, et al. Dynamic modeling and experimental study of a bionic manta ray robot[J]. Journal of Unmanned Undersea Systems, 2024, 32(1): 40-47.
    [10] 李久岳. 自主水下管道巡检机器人的设计[D]. 大连: 大连交通大学, 2022.
    [11] Det Norsoke Veritas(DNV). Integrity management of submarine pipeline systems[S]. Oslo, Norway: DNV, 2009.
    [12] 中国造船工程学会发布2025年第二批团体标准[S]. 船舶标准化工程师, 2025, 58(4): 2.
    [13] 吴迅, 李纯清. 磁流体推进器优化设计及对比研究[J]. 船电技术, 2024, 44(8): 26-31, 37.

    WU X, LI C Q. Optimal design and comparative study of magnetohydrodynamic thrusters[J]. Marine Electric & Electronic Technology, 2024, 44(8): 26-31, 37.
    [14] 梁旭. 水下双模式管道巡检机器人的设计与实验分析[D]. 大连: 大连交通大学, 2025.
    [15] 葛倩倩, 葛亮, 汪耀明, 等. 离子交换膜的发展态势与应用展望[J]. 化工进展, 2016, 35(6): 1774-1785.

    GE Q Q, GE L, WANG Y M, et al. Development trends and application prospects of ion exchange membranes[J]. Chemical Industry and Engineering Progress, 2016, 35(6): 1774-1785.
    [16] 齐侃侃, 董昊. 磁通门传感器探头测试分析[J]. 电子测试, 2020, 1: 41-44.
    [17] 申军伟, 程珩. 2自由度并联机构的运动轨迹规划优化[J]. 机械传动, 2021, 45(7): 110-115.

    SHEN J W, CHENG H. Optimization of motion trajectory planning for a 2-DOF parallel mechanism[J]. Journal of Mechanical Transmission, 2021, 45(7): 110-115.
    [18] 伍赛特. 船用磁流体推进技术应用前景展望[J]. 机电信息, 2020, 36: 74-75.

    WU S T. Prospects for the application of marine magnetohydrodynamic propulsion technology[J]. Mechanical and Electrical Information, 2020, 36: 74-75.
    [19] 辛旭. 磁流体推进技术应用及展望[J]. 科技创新与应用, 2022, 12(15): 186-189.
    [20] 冯一波, 石书强, 王建海, 等. 气水两相下降流中泡状流与段塞流转换边界研究[J]. 特种油气藏, 2024, 31(2): 166-174.
    [21] FUKASAWA S ,KUMAGAI T ,OHMI T , et al. Effect of small rectangular channel height on bubble moving velocity in gas-liquid two-phase flow through sudden contraction[J]. Japanese Journal of Multiphase Flow, 2013, 27(2): 168-174.[J]. Japanese Journal of Multiphase Flow, 2013, 27(2): 168-174. doi: 10.3811/jjmf.27.168
    [22] 马莉司. 油气管道中阴极保护技术的应用分析[J]. 中国石油和化工标准与质量, 2025, 45(8): 148-150.
    [23] 罗文昊. 仿生六足机器人协同控制系统研究[D]. 南京: 南京林业大学, 2024.
    [24] 南凯刚, 姜晟, 张进华, 等. 柔性胸鳍推进仿蝠鲼机器鱼CPG运动控制[J]. 水下无人系统学报, 2023, 31(2): 201-210.

    NAN K G, JIANG S, ZHANG J H, et al. CPG motion control of a robotic manta with flexible pectoral fin propulsion[J]. Journal of Unmanned Undersea Systems, 2023, 31(2): 201-210.
    [25] 李佩娟, 杨刚, 郭铁铮, 等. 水下蛇形机器人建模与运动控制[J]. 水下无人系统学报, 2024, 32(6): 1091-1099.

    LI P J, YANG G, GUO T Z, et al. Modeling and motion control of an underwater snake-like robot[J]. Journal of Unmanned Undersea Systems, 2024, 32(6): 1091-1099.
    [26] 杜治宇, 吴政康, 丁强, 等. 基于中枢模式发生器的仿生机器鱼闭环控制方法[J]. 船舶工程, 2025, 47(4): 89-97.

    DU Z Y, WU Z K, DING Q, et al. A closed-loop control method for bionic robotic fish based on central pattern generator[J]. Ship Engineering, 2025, 47(4): 89-97.
    [27] 朱文亮, 刘敏杰, 王志鹏, 等. 水下机器人的PID控制系统设计[J]. 水上安全, 2024, 6: 1-3.
    [28] 陈振伟. 平衡机器人运动位姿PID控制优化仿真研究[J]. 河北北方学院学报(自然科学版), 2024, 40(7): 11-15.
    [29] 肖丽. 基于Matlab Simulink的系统建模与仿真技术分析[J]. 集成电路应用, 2024, 41(9): 108-109.

    XIAO L. Analysis of system modeling and simulation technology based on Matlab Simulink[J]. Application of IC, 2024, 41(9): 108-109.
    [30] 张帅杰, 钟国院, 臧春华, 等. 流程工业鲁棒性PID参数整定方法[J]. 计算机与数字工程, 2024, 52(11): 3273-3279, 3369.

    ZHANG S J, ZHONG G Y, ZANG C H, et al. A robust PID parameter tuning method for process industries[J]. Computer & Digital Engineering, 2024, 52(11): 3273-3279, 3369.
    [31] 郭进群. 基于几何代数的多环耦合机构自由度计算方法[D]. 杭州: 浙江理工大学, 2023.
    [32] 李宏强. 船舶交流超导磁流体推进技术研究[D]. 哈尔滨: 哈尔滨工程大学, 2019.
    [33] ZHANG Y N, XIE Y F, ZHAO G, et al. The important role of fluid mechanics in the engineering field[J]. E3S Web of Conferences, 2024, 56: 1160.
    [34] 张大朋, 赵博文, 严谨, 等. 船体静水及波浪航行时在STAR-CCM+软件中仿真结果的有效性验证[J]. 水道港口, 2022, 43(1): 121-127.
  • 加载中
图(15) / 表(4)
计量
  • 文章访问数:  87
  • HTML全文浏览量:  45
  • PDF下载量:  6
  • 被引次数: 0
出版历程
  • 收稿日期:  2025-07-18
  • 修回日期:  2025-09-14
  • 录用日期:  2025-09-15
  • 网络出版日期:  2025-10-09

目录

    /

    返回文章
    返回
    服务号
    订阅号