Research and Implementation of Aperture Measurement Method for Irregular Broken Hole of Target Plate

ZHANG Jianting; JIANG Xiaopeng; QU Chunliang; ZHANG Xitong; XU Bo

doi:10.11993/j.issn.2096-3920.2025-0051

Article Contents

Article Navigation > Journal of Unmanned Undersea Systems > 2025 > Accepted Manuscript

ZHANG Jianting, JIANG Xiaopeng, QU Chunliang, ZHANG Xitong, XU Bo. Research and Implementation of Aperture Measurement Method for Irregular Broken Hole of Target Plate[J]. Journal of Unmanned Undersea Systems. doi: 10.11993/j.issn.2096-3920.2025-0051

Citation:

ZHANG Jianting, JIANG Xiaopeng, QU Chunliang, ZHANG Xitong, XU Bo. Research and Implementation of Aperture Measurement Method for Irregular Broken Hole of Target Plate[J]. Journal of Unmanned Undersea Systems. doi: 10.11993/j.issn.2096-3920.2025-0051

Citation:

PDF( 3877 KB)

Research and Implementation of Aperture Measurement Method for Irregular Broken Hole of Target Plate

doi: 10.11993/j.issn.2096-3920.2025-0051

1.
The 705 Research Institute, China Shipbuilding Industry Corporation Limited, Xi’an 710077, China
2.
Unit 92417th, the Liberation Army of China, Fuding 355200, China

Received Date: 2025-04-05
Accepted Date: 2025-09-08
Rev Recd Date: 2025-09-02

Available Online: 2025-10-27

Abstract

Abstract

In this paper, the method of flow comparison is used to measure the irregular hole diameter of target plate, which is close to the actual working condition, simple and easy to implement, reliable and low in use cost, and solves the technical problems of irregular hole diameter measurement. Accurate measurement of hole size by taking irregular holes as regular holes has special characterization significance for underwater damage effectiveness evaluation. This method can also meet the needs of similar irregular aperture measurement in different industries.
- aperture,
- flow comparison method,
- target plate

FullText(HTML)

References(11)

References

[1]	DAVID F、IAN C、PAUL H. A fast and accurate model for the creation of explosion fragments with improved fragment shape and dimensions[J]. Defence Technology, 2022, 18: 159-169 doi: 10.1016/j.dt.2020.12.004
[2]	王冬生. 基于光纤光栅系统的流量测量研究[D]. 秦皇岛: 燕山大学, 2014.
[3]	罗守南. 基于超声多普勒方法的管道流量测量研究[D]. 北京: 清华大学, 2004.
[4]	肖骁. 基于亥姆霍兹线圈励磁的电容式电磁流量测量技术研究[D]. 成都: 电子科技大学, 2014.
[5]	陶晓磊. 基于调节阀的流量测量方法研究[D]. 杭州: 中国计量大学, 2014.
[6]	沈昱明. 流量测量中若干问题的计量学基本原则[J]. 计量学报, 2008, 29(5): 472-474. SHEN Y M, Principles of metrology for problems in the flow measurement[J]. Acta Metrologica Sinica, 2008, 29(5): 472-474.
[7]	金珍珍, 梅武军, 周卫华, 等. 基于FPGA和单片机的孔径测量系统[J]. 轻工机械, 2022, 40(1): 71-77. JIN Z Z, MEI W J, ZHOU W H, et al. Aperture measurement system based on FPGA and MCU[J]. Light Industry Machinery, 2022, 40(1): 71-77.
[8]	李治国, 马峰, 朱炜, 等. 基于深度学习神经网络的水中爆炸靶板变形响应预测研究[J]. 水下无人系统学报, 2024, 32(6): 1045-1052,1062. LI Z G, MA F, ZHU W, et al. Prediction of deformation response of target plate in underwater explosion based on deep learning neural network[J]. Journal of Unmanned Undersea Systems, 2024, 32(6): 1045-1052,1062.
[9]	邵建军. 一种爆破型鱼雷战斗部对舰船毁伤效能评估方法[J]. 水下无人系统学报, 2017, 25(4): 272-277. SHAO J J, An evaluation method for damaging efficiency of blasting torpedo warhead to warship[J]. Journal of Unmanned Undersea Systems, 2017, 25(4): 272-277.
[10]	谢振华, 宋存义. 工程流体力学[M]. 北京: 冶金工业出版社, 106-107.
[11]	于洪仕, 张涛, 葛利俊. 多孔孔板流出系数和压力损失的影响因素[J]. 化工自动化及仪表, 2016, 43(1): 20-22,88. YU H S, ZHANG T, GE L J. Influencing factors for discharge coefficient and pressure loss of multi-hole orifice plate[J]. Control and Instruments in Chemical Industry, 2016, 43(1): 20-22,88.