
| Citation: | CHEN Shao-qiang, WANG Hong-wei, LI Jian-chen, LIU Jin, ZHANG Jian-ting. An Improved Design Method of Torpedo′s Wedge Ring Connection Structure for Enhancement of Supportability[J]. Journal of Unmanned Undersea Systems, 2017, 25(新刊4): 371-376. doi: 10.11993/j.issn.2096-3920.2017.04.011 |
| [1] |
陆家富, 欧阳智江. 关于楔环设计的探讨[J]. 西南科技大学学报, 2015, 30(4): 71-72, 84.
Lu Jia-fu, Ouyang Zhi-jiang. Discussion about the Design of Wedge-Ring[J]. Journal of Southwest University of Science and Technology, 2015, 30(4): 71-72, 84.
|
| [2] |
黄震中. 鱼雷总体设计[M]. 西安: 西北工业大学出版社, 1987.
|
| [3] |
卜广志, 宋保维, 张宇文, 等. 楔环连接的可靠性优化设计[J]. 机械科学与技术, 2000, 19(1): 57-59.
Bu Guang-zhi, Song Bao-wei, Zhang Yu-wen, et a1. The Reliability Optimization of Wedge Ring Connection[J]. Mechanical Science and Technology, 2000, 19(1): 57-59.
|
| [4] |
毛昭勇, 宋保维, 胡海豹. 基于可靠性的楔环连接模糊优化设计[J]. 机械科学与技术, 2004, 23(9): 1019-1021.
Mao Zhao-yong, Song Bao-wei, Hu Hai-bao. Fuzzy Optimization Design of a Wedge Ring Connection Based on Reliability[J]. Mechanical Science and Technology, 2004, 23(9): 1019-1021.
|
| [5] |
宋保维, 刘旭琳, 王鹏. 鱼雷楔环连接结构6 σ稳健优化设计[J]. 鱼雷技术, 2007, 15(5): 8-10.
Song Bao-wei, Liu Xu-lin, Wang Peng. 6 σ Robust Optimization Design for Wedge Ring Connection Structure of Torpedo[J]. Torpedo Technology, 2007, 15(5): 8-10.
|
| [6] |
王鹏, 宋保维, 刘旭琳, 等. 鱼雷连接结构可靠性稳健优化设计[J]. 火力与指挥控制, 2009, 34(1): 117-119.
Wang Peng, Song Bao-wei, Liu Xu-lin, et al. Robust Reliability Optimization Design for Connection Structure of Torpedo[J]. Fire Control and Command Control, 2009, 34(1): 117-119.
|
| [7] |
黄鹏, 尹益辉, 莫军. 楔环连接结构两种有限元优化设计方案研究[J]. 机械工程学报, 2006, 42(8): 205-209.
Huang Peng, Yin Yi-hui, Mo Jun. Two Optimization Designs Research of Wedged-Ring Joint Structure Based on FEM[J]. Journal of Mechanical Engineering, 2006, 42(8): 205-209.
|
| [8] |
黄鹏, 莫军, 尹益辉, 等. 拉伸载荷下楔环连接壳体的应力解析方法[J]. 工程力学, 2007, 24(8): 66-71.
Huang Peng, Mo Jun, Yin Yi-hui, et al. Analytic Solution for Stress in Wedged-Ring Connected Shell under Tensile Loading[J]. Engineering Mechanics, 2007, 24(8): 66-71.
|
| [9] |
刘远东, 尹益辉, 余绍蓉. 基于多目标优化的楔环连接结构尺寸设计[J]. 机械设计, 2009, 26(1): 50-52.
Liu Yuan-dong, Yin Yi-hui, Yu Shao-rong. Structural Dimension Design of Wedged-Ring Linking Based on Multi-objective Optimization[J]. Machine Design, 2009, 26(1): 50-52.
|
| [10] |
尹益辉, 符春渝, 莫军. 楔环连接结构的非线性静力学行为研究[J]. 四川大学学报, 2012, 44(2): 107-109.
Yin Yi-hui, Fu Chun-yu, Mo Jun. Studies on Nonlinear Mechanical Behavior of a Wedged-Ring Connector Under Static Loads[J]. Journal of Sichuan University, 2012, 44(2): 107-109.
|
| [11] |
马锐磊, 尹韶平, 曹小娟. 鱼雷楔环连接结构等效刚度建模与模态分析[J]. 舰船科学技术, 2014, 36(2): 143- 147.
Ma Rui-lei, Yin Shao-ping, Cao Xiao-juan. Research on Finite Element Modeling and Modal Analysis of Torpedo′s Wedged-Ring Connection Structure[J]. Ship Science and Technology, 2014, 36(2): 143-147.
|
| [12] |
刘飞飞, 石秀华, 杜喜昭, 等. 楔环连接方式的圆柱壳体振动传递特性分析[J]. 国外电子测量技术, 2011, 30 (12): 30-33.
Liu Fei-fei, Shi Xiu-hua, Du Xi-zhao, et al. Analysis on the Vibration Transfer Characteristic of the Cylindrical Shell with Wedge Ring[J]. Foreign Electronic Measurement Technology, 2011, 30(12): 30-33.
|
| [13] |
杜宏伟, 姚进, 羊海涛. 基于有限元法的楔环参数概率约束优化[J]. 中国机械工程, 2010, 21(14): 1651-1654.
Du Hong-wei, Yao Jin, Yang Hai-tao. Parameter Probability Constraint Optimization of Wedged-Ring Based on FEM[J]. China Mechanical Engineering, 2010, 21(14): 1651-1654.
|
| [14] |
严海, 马锐磊, 梁跃, 等. 基于模态参数的水下航行器楔环结构有限元模型修正[J]. 鱼雷技术, 2016, 24(2): 87-93.
Yan Hai, Ma Rui-lei, Liang Yue, et al. Finite Element Model Correction for Wedged-Ring Connection Structure of Underwater Vehicle Based on Modal Parameters[J]. Torpedo Technology, 2016, 24(2): 87-93.
|
| [15] |
马锐磊, 尹韶平, 曹小娟, 等. 楔环连接结构对鱼雷壳体声辐射的影响分析[J]. 鱼雷技术, 2014, 22(3): 169-173.
Ma Rui-lei, Yin Shao-ping, Cao Xiao-juan, et a1. Effect of Wedged Ring Connection Structure on Noise Radiation of Torpedo Shell[J]. Torpedo Technology, 2014, 22(3): 169-173.
|