• 中国科技核心期刊
  • JST收录期刊
MO Hui-xia, DANG Jian-jun, LUO Kai, HUANG Chuang, HUANG Biao. Numerical Calculation of Additional Mass for Undersea Vehicle[J]. Journal of Unmanned Undersea Systems, 2017, 25(新刊3): 250-255. doi: 10.11993/j.issn.2096-3920.2017.03.006
Citation: MO Hui-xia, DANG Jian-jun, LUO Kai, HUANG Chuang, HUANG Biao. Numerical Calculation of Additional Mass for Undersea Vehicle[J]. Journal of Unmanned Undersea Systems, 2017, 25(新刊3): 250-255. doi: 10.11993/j.issn.2096-3920.2017.03.006

Numerical Calculation of Additional Mass for Undersea Vehicle

doi: 10.11993/j.issn.2096-3920.2017.03.006
  • Received Date: 2017-03-31
  • Rev Recd Date: 2017-05-25
  • Publish Date: 2017-08-20
  • Additional mass force on undersea vehicle is a fluid inertia force due to unsteady motion, which is difficult to obtain from experiment or numerical calculation. In this paper, an unsteady flow field calculation model of an undersea vehicle is presented in the moving coordinates system by making use of the 3D N-S equation and the k-epsilon turbulence model. The proposed model is verified by inertia force solutions of ellipsoid and circular cylinder models. Then, based on the present numerical method, the additional mass of an undersea vehicle is calculated. Simulation results show that the relative errors of the obtained additional mass are less than 10%. This numerical calculation method of additional mass may be helpful to the overall design and hydrodynamic calculation of an undersea vehicle

     

  • loading
  • [1]
    周景军, 李育英. 一种水下航行体附加质量数值计算方法[J]. 鱼雷技术, 2013, 21(4): 246-249.

    Zhou Jing-jun, Li Yu-ying. A Numerical Computation Method of Additional Mass for Underwater Vehicle[J]. Torpedo Technology, 2013, 21(4): 246-249.
    [2]
    姚保太, 康宁, 郑伟奇. 变加速运动圆球附加质量和阻力仿真分析[J]. 计算机辅助工程, 2014, 23(3): 82-87.

    Yao Bao-tai, Kang Ning, Zheng Wei-qi. Simulation and Analysis on Added Mass and Drag of Varying Accelerated Motion Ball[J]. Computer Aided Engineering, 2014, 23(3): 82-87.
    [3]
    傅慧萍, 李杰. 附加质量CFD计算方法研究[J]. 哈尔滨工程大学学报, 2011, 32(2): 148-152.

    Fu Hui-ping, Li Jie. Numerical Studies of Added Mass Based on the CFD Method[J]. Journal of Harbin Engineering University, 2011, 32(2): 148-152.
    [4]
    王鹏, 宁腾飞, 杜晓旭, 等. 带复杂外形附体的AUV流体动力数值计算[J]. 兵工学报, 2013, 34(2): 223-228.

    Wang Peng, Ning Teng-fei, Du Xiao-xu, et al. Numerical Calculation of Hydrodynamics of AUV with the Complex Shape Appendage[J]. Acta Armamentarii, 2013, 34(2): 223-228.
    [5]
    王鹏, 翟继莹, 宁腾飞. 带复杂外形附体的AUV旋臂水池数值计算[J]. 西北工业大学学报, 2013, 31(5): 764-769.

    Wang Peng, Zhai Ji-ying, Ning Teng-fei. Calculating Rotary Derivatives of AUV with Complex Shape Appendages[J]. Journal of Northwestern Polytechnical University, 2013, 31(5): 764-769.
    [6]
    Causin P, Gerbeau J F, Nobile F. Added Mass Effects in the Design of Partitioned Algorithms for Fluid-Structure Problems with Application to Blood Flows[J]. Computer Methods in Applied Mechanics & Engineering, 2005, 194 (42-44): 4506-4527.
    [7]
    Lu L, Yang Y R, Li P, et al. Added Mass, Added Stiffness and Added Damping Coefficients for a Parallel Plate- Type Structure[J]. Applied Mechanics & Materials, 2011, 66-68: 1738-1742, 2011.
    [8]
    Zhu J, Lin Z, Liu Q, et al. Calculation of the Added Mass of a Liquid Tank′s Bulkheads[J]. Journal of Marine Science and Application, 2014, 13(1): 41-48.
    [9]
    He C, Duan Z, Ou J, et al. Coefficients of Added Mass/ damping of a Low-mass-damping-ratio Cylinder Subjected to Vortex-induced Vibration[C]//第十四届中国海洋(岸)工程学术讨论会论文集(上册). 呼和浩特: 中国海洋, 2009.
    [10]
    Wang K, Zhang X, Zhang Z Q, et al. Numerical Analysis of Added Mass and Damping of Floating Production, Storage and Offloading System[J]. Acta Mechanica Sinica, 2012, 28(3): 870-876.
    [11]
    Watts P B, Jensen R L, David M, et al. Vertical Hand Force and Forearm Emg during a High-step Rock-on Climbing Move With and without Added Mass[J]. Medicine & Science in Sports & Exercise, 2005, 37(S5): S122.
    [12]
    冯双双, 魏晓娟, 孙磊, 等. 流场中沿轴向运动圆柱的附加质量计算[J]. 计算机辅助工程, 2015, 24(2): 42-46.

    Feng Shuang-shuang, Wei Xiao-juan, Sun Lei, et al. Calculation on Added Mass of Cylinder Moving along Its Axis in Flow Field[J]. Computer Aided Engineering, 2015, 24(2): 42-46.
    [13]
    刘丹, 王晓亮, 单雪雄. 平流层飞艇的附加质量及其对飞艇运动的影响[J]. 计算机仿真, 2006, 23(6): 52-56.

    Liu Dan, Wang Xiao-liang, Shan Xue-xiong. Added Mass to Stratospheric Airship and Its Effect on Motion[J]. Computer Simulation, 2006, 23(6): 52-56.
    [14]
    刘成刚. 潜艇附加质量计算及其水中振动特性研究[D]. 哈尔滨: 哈尔滨工程大学, 2011.
    [15]
    马烨, 单雪雄. 数值计算复杂外形物体附加质量的新方法[J]. 计算机仿真, 2007, 24(5): 75-78.

    Ma Ye, Shan Xue-xiong. A New Numerical Computation Method for Added Masses of Complicated Object[J]. Computer Simulation, 2007, 24(5):75-78.
    [16]
    严卫生. 鱼雷航行力学[M]. 西安: 西北工业大学出版社, 2005: 238.
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Article Metrics

    Article Views(1027) PDF Downloads(298) Cited by()
    Proportional views
    Related
    Service
    Subscribe

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return