Citation: | YANG Li-jian, GAN Zu-wang, FU Yun-fei. Reliability Analysis of an O-ring Seal Structure Based on Stress-Strength Interference Theory[J]. Journal of Unmanned Undersea Systems, 2017, 25(新刊2): 188-192. doi: 10.11993/j.issn.2096-3920.2017.02.008 |
[1] |
穆志韬, 邢耀国. 固体发动机结构密封特性分析[J]. 润滑与密封, 2004(2): 33-35.
Mu Zhi-tao, Xing Yao-guo. Analysis of the Sealing Structure Characteristics for Solid Engine[J]. Lubrication Engineering, 2004(2): 33-35.
|
[2] |
陆婷婷, 王维民. 橡胶 O 形密封圈研究发展综述[J]. 液压气动与密封, 2014 , 34(10): 6-11.
Lu Ting-ting, Wang Wei-min. Development Review of O-ring with Rubber Material[J]. Hydraulics Pneumatics & Seals, 2014, 34 (10): 6-11.
|
[3] |
中国农业机械化科学研究院液压技术研究所. GB-T 3452.1-2005液压气动用O形橡胶密封圈第1部分: 尺寸系列及公差[S]. 北京: 中国标准出版社, 2005.
|
[4] |
陈占清, 詹永麒, 朱昌明. 压缩率对 O 形橡胶密封圈密封性能的影响[J]. 流体传动与控制, 2007(2): 46-48.
Chen Zhan-qing, Zhan Yong-qi, Zhu Chang-ming. Effects of Compressive Rate on Sealing Characteristic of O-ring[J]. Fluid Power Transmission and Control, 2007 (2): 46-48.
|
[5] |
刘惟信. 机械可靠性设计[M]. 北京: 清华大学出版社, 1996.
|
[6] |
谢里阳, 李翠玲. 应力-强度干涉模型在系统失效概率分析中的应用及相关问题[J]. 机械强度, 2005, 27(4): 492-497.
Xie Li-yang, Li Cui-Ling. Appliacation of Load-strength Interference Model in System Failure Probability Extimation[J]. Journal of Mechanical Strength, 2005, 27(4): 492-497.
|
[7] |
Lazzarin P, Berto F, Zappalorto M. Rapid Calculations of Notch Stress Intensity Factors Based on Averaged Strain Energy Density from Coarse Meshes: Theoretical Bases and Applications[J]. International Journal of Fatigue, 2010, 32(10): 1559-1567.
|
[8] |
张建国, 苏多, 刘英卫. 机械产品可靠性分析与优化[M]. 北京: 电子工业出版社, 2008.
|
[9] |
Lee T W, Kwak B M. A Reliability-based Optimal Design Using Advanced First Order Second Moment Method[J]. Journal of Structural Mechanics, 1987, 15(4): 523-542.
|
[10] |
Hasofer A M, Lind N C. An Exact and Invariant First Order Reliability Format[J]. Journal of Engineering Mechanics, 1974, 100(EMI): 111-121.
|
[11] |
周炜, 薛来, 赵敏. 水下航行器释放机构动作可靠性分析[J]. 鱼雷技术, 2015, 23(6): 410-413.
Zhou Wei, Xue Lai, Zhao Min. Mechanical Reliability Analysis of Releasing Device for Underwater Vehicle[J]. Torpedo Technology, 2005, 27(4): 492-497.
|
[12] |
Novák D, Vo?echovský M, Teplý B. FReET: Software for the Statistical and Reliability Analysis of Engineering Problems and FReET-D: Degradation Module[J]. Advances in Engineering Software, 2014, 72(2): 179-192.
|
[13] |
王超, 王金. 机械可靠性工程[M]. 北京: 冶金工业出版社, 1992.
|