Design and Experimental Study of Submarine Buried Cable Detection and Hanging Device
-
摘要: 针对海底掩埋缆服役寿命到期更换或意外发生中断需维修等问题, 文中设计了一种海底掩埋缆探挂装置, 该装置可用于挂钩海底掩埋缆, 并对掩埋缆起到标记作用, 便于水下作业工具后续对其进行检修和修复。针对该探挂装置搭建试验台架并进行试验研究。利用集成位移传感器和压力传感器采集探挂装置反馈信号, 基于试验数据形成海底掩埋缆探挂信息作业窗口图, 用于指导判断探挂装置对海底掩埋缆挂钩标记是否成功。该研究成果可为水下作业工具的设计和应用提供重要的技术支持和试验依据。Abstract: Regarding the replacement and maintenance of submarine buried cables, a piece of equipment, i.e., a submarine buried cable detection and hanging device, was specifically designed in this study that can be used to hook and mark a submarine buried cable, with the aim of facilitating underwater operation tools in completing future maintenance and repair. To verify the equipment design, a test bench was prepared for technical testing. During the test, feedback signals of the detection and hanging device were collected through an integrated displacement sensor and a pressure sensor. From the signal data, the operation window diagram corresponding to submarine buried cable detection and hanging information was established. Finally, the operation window diagram was used to guide and judge whether the detection and hanging device successfully marked the hook of submarine buried cable or not. The research results could provide important technical support as well as experimental basis for further design and application of underwater operation tools.
-
[1] 林如. 海底管道射流式挖沟机的研究及射流破土的仿真分析[D]. 哈尔滨: 哈尔滨工程大学, 2019. [2] 戴源, 奉虎, 袁朝纲, 等. 射流式海底管道挖沟机喷嘴选型及布置研究[J]. 中国水运, 2018, 18(4): 96-97, 100.Dai Yuan, Feng Hu, Yuan Chaogang, et al. Study on nozzle selection and layout of jet subsea pipeline trencher[J]. China Water Transport, 2018, 18(4): 96-97, 100. [3] 李文涛, 葛彤. 挖沟机相关技术进展[J]. 船海工程, 2010, 39(4): 146-150. doi: 10.3963/j.issn.1671-7953.2010.04.046Li Wentao, Ge Tong. Progress of trencher related technology[J]. Ship & Ocean Engineering, 2010, 39(4): 146-150. doi: 10.3963/j.issn.1671-7953.2010.04.046 [4] 王子维. 海底射流开沟机喷冲臂设计及试验验证[D]. 大连: 大连理工大学, 2021. [5] 张原锋, 张隆荣. 射流冲刷试验及其在黄河潼关河段的应用[J]. 水利水电技术, 2004, 35(12): 19-22. doi: 10.13928/j.cnki.wrahe.2004.12.005Zhang Yuanfeng, Zhang Longrong. Jet flow scouring experiment sand application of their results to the Tongguan stretch of the Yellow River[J]. Water Resources and Hydropower Engineering, 2004, 35(12): 19-22. doi: 10.13928/j.cnki.wrahe.2004.12.005 [6] Yeh P H, Chang K A. Large-scale laboratory experiment on erosion of sand beds by moving circular vertical jets[J]. Ocean Engineering, 2009, 36: 248-255. doi: 10.1016/j.oceaneng.2008.11.006 [7] Beltaos S, Rajaratnam N. Impingement of axisymmetric developing jets[J]. Journal of Hydraulic Research, 1977, 15(4): 311-326. doi: 10.1080/00221687709499637 [8] 许可, 赵慧, 沈少杰. 作业型载人潜水器通信中继浮标收放绞车的设计研究[J]. 船舶工程, 2016, 38(3): 50-54. doi: 10.13788/j.cnki.cbgc.2016.03.050Xu Ke, Zhao Hui, Shen Shaojie. Research on design of communication buoy winch for operating manned submersible[J]. Ship Engineer, 2016, 38(3): 50-54. doi: 10.13788/j.cnki.cbgc.2016.03.050 [9] 刘涛, 王璇, 王帅, 等. 深海载人潜水器发展现状及技术发展[J]. 中国造船, 2015, 53(3): 233-242.Liu Tao, Wang Xuan, Wang Shuai, et al. The current status and technical development of deep sea manned submersible[J]. Shipbuilding of China, 2015, 53(3): 233-242. [10] 陈鹰, 杨灿军, 顾临怡, 等. 基于载人潜水器的深海资源勘探作业技术研究[J]. 机械工程学报, 2003, 39(11): 38-43. doi: 10.3321/j.issn:0577-6686.2003.11.006Chen Ying, Yang Canjun, Gu Linyi, et al. DSV-specific tool-box for the deep-sea resources exploitation[J]. Chinese Journal of Mechanical Engineering, 2003, 39(11): 38-43. doi: 10.3321/j.issn:0577-6686.2003.11.006