Method of Storage Life Assessment of Intercept Missile Based on Whole Life Cycle
-
摘要: 针对现有条件下无法对拦截弹贮存寿命进行真实考核的问题, 基于全寿命周期理论, 对拦截弹贮存寿命进行评估。首先依据拦截弹寿命剖面、贮存剖面以及贮存环境剖面进行拦截弹寿命设计; 然后结合拦截弹产品技术准备和试验, 对影响拦截弹贮存寿命的主要组件和材料进行分析; 通过对影响贮存寿命的主要组件及材料分别开展寿命评估和寿命试验, 以及采信相关试验、其他相似产品或已有资料等数据和结论, 开展电子部件寿命评估等方式, 对拦截弹寿命进行综合评估。该方法能够为其他弹药类产品贮存寿命评估提供参考。Abstract: The storage life of intercept missiles was evaluated based on the whole life cycle theory to address the challenges in assessing the storage life of interceptor under the existing conditions. Based on the intercept missile life and storage life profile, the storage life of the intercept missile can be evaluated by analyzing the intercept missile life design using the life data of similar products and the storage life test of accelerated aging of newly developed components. Combined with the technical preparation and testing of the intercept missile, the main components and materials affecting the storage life of the product intercept missile were analyzed. Life assessment analysis and life tests were carried out on the main components and materials that affect the storage life. We used relevant tests, similar products, or existing data and conclusions to evaluate the life of intercept missiles comprehensively. The results show that the storage life of the intercept missile satisfies these requirements.
-
Key words:
- intercept missile /
- storage life /
- evaluation
-
表 1 影响拦截弹贮存寿命的主要组件及材料组成
Table 1. Main components and material composition affecting shelf life of the intercept missile
序号 单元名称 主要材料/器件 失效模式/机理 1 金属
材料合金钢、铝合金 老化, 性能下降 2 非金属材料 尼龙 、聚苯乙烯泡沫、可发性聚苯乙烯树脂、乙丙橡胶 老化, 性能下降 3 电子
部件电子元器件 老化, 性能下降 4 火工品 炸药、传爆药、发射药、点火具、热电池、气囊组件等 老化, 工作失效 表 2 单元非工作失效率汇总
Table 2. Summary of unit non-working failure rate
单元 非工作状态失效率/(10−6·h−1) N1 0.042 09 N2 0.017 38 N3 0.002 97 N4 0.017 12 N5 0.000 75 N6 0.001 63 N7 0.00135 表 3 拦截弹组部件贮存寿命情况汇总
Table 3. Shelf life of each component of suspended intercept missile
组部件名称 组成 结论 评估方法 全弹 金属件 满足 采信长贮数据 非金属件 满足 采信长贮数据 电子部件 满足 综合评估 部件1 金属件 满足 采信长贮数据 非金属件 满足 采信长贮数据 炸药 满足 采信长贮数据 传爆药 满足 采信长贮数据 部件2 金属件 满足 采信长贮数据 非金属件 满足 采信长贮数据 热电池 满足 贮存寿命试验 电子部件 满足 综合评估 部件3 金属件 满足 采信长贮数据 非金属件 满足 采信长贮数据 气囊组件 满足 贮存寿命试验 部件4 金属件 满足 采信长贮数据 非金属件 满足 采信长贮数据 发射药 满足 采信长贮数据 电点火具 满足 贮存寿命试验 电子部件 满足 综合评估 部件5 金属件 满足 采信长贮数据 -
[1] 戴树森. 可靠性试验及其统计分析[M]. 北京: 国防工业出版社, 1984. [2] 贺国芳. 可靠性数据的收集与分析[M]. 北京: 国防工业出版社, 1995. [3] 罗天元, 周堃, 余淑华, 等. 国外弹药贮存寿命试验与评价技术概述[J]. 装备环境工程, 2005, 2(4): 17-21. doi: 10.3969/j.issn.1672-9242.2005.04.003Luo Tian-yuan, Zhou Kun, Yu Shu-hua, et al. Summarization on Foreign Ammunition Storage Life Test and Evaluation Technology[J]. Equipment Environmental Engineering, 2005, 2(4): 17-21. doi: 10.3969/j.issn.1672-9242.2005.04.003 [4] 郑波, 李淦, 李明. 基于成败型试验数据的弹药贮存寿命评估[J]. 军械工程学院学报, 2005, 17(5): 29-30.Zheng Bo, Li Gan, Li Ming. Evalution of Ammunition Storage Life Based on Test Data of Success-Failure Type[J]. Journal of Ordnance Engineering College, 2005, 17(5): 29-30. [5] 李东阳, 刘志岭. 火工品长贮失效情况分析[J]. 火工品, 1996(2): 28-30.Li Dong-yang, Liu Zhi-ling. An Analysis on the Failure of Initiating Explosive Device during Long Tern Storage[J]. Initiators and Pyrotechnics, 1996(2): 28-30. [6] 邓爱民, 陈循, 张春华, 等. 加速退化试验技术综述[J]. 兵工学报, 2007, 28(8): 1002-1007. doi: 10.3321/j.issn:1000-1093.2007.08.021Deng Ai-min, Chen Xun, Zhang Chun-hua, et al. A Comprehensive Review of Accelerated Degradation Testing[J]. Acta Armamentarii, 2007, 28(8): 1002-1007. doi: 10.3321/j.issn:1000-1093.2007.08.021 [7] 张春华, 温熙森, 陈循. 加速寿命试验技术综述[J]. 兵工学报, 2004, 25(4): 485-490. doi: 10.3321/j.issn:1000-1093.2004.04.024Zhang Chun-hua, Wen Xi-sen, Chen Xun. A Comprehensive Review of Accelerated Life Testing[J]. Acta Armamentarii, 2004, 25(4): 485-490. doi: 10.3321/j.issn:1000-1093.2004.04.024 [8] 李琛, 邵宗战, 张姝红, 等. 基于恒定应力加速寿命试验法评估深弹贮存寿命[J]. 科技导报, 2009, 27(20): 87-88. doi: 10.3321/j.issn:1000-7857.2009.20.020Li Chen, Shao Zong-zhan, Zhang Shu-hong, et al. Life Estimation of Deep Bomb Storage Based on Constant Stress Accelerated Life Testing[J]. Science & Technology Review, 2009, 27(20): 87-88. doi: 10.3321/j.issn:1000-7857.2009.20.020 [9] 机械电子工业部第二一三研究所. 火工品试验方法 71℃试验法: GJB736.8-1990[S]. 北京: 国防科学技术工业委员会, 1990. [10] 机械电子工业部第二一三研究所. 火工品试验方法 加速寿命试验 恒定温度应力试验法: GJB 736.13-1991[S]. 北京: 国防科学技术工业委员会, 1991.