水下装备AIP动力系统尾气排放技术综述

李天卉; 李新典; 李红享; 黄润伍; 王 傲; 刘 强

doi:10.11993/j.issn.2096-3920.2021.06.009

水下装备AIP动力系统尾气排放技术综述

doi: 10.11993/j.issn.2096-3920.2021.06.009

李天卉^1,2,
李新典^1,2,
李红享^1,2,
黄润伍^1,2,
王傲^1,2,
刘强^1,2*,

1.
武汉船用电力推进装置研究所, 湖北武汉, 430064
2.
武汉氢能与燃料电池产研院, 湖北武汉, 430064

详细信息

通讯作者:
*通信刘强(1981-), 男, 高级工程师, 主要研究方向为燃料电池及化学电源.

中图分类号: TJ630.32 TK421.5
计量
- 文章访问数: 251
- HTML全文浏览量: 33
- PDF下载量: 89
- 被引次数: 0
出版历程
- 收稿日期: 2021-07-14
- 修回日期: 2021-08-11
- 刊出日期: 2021-12-31

Review of Exhaust Disposal Technologies for AIP Power System of Underwater Equipment

LI Tian-hui^1,2,
LI Xin-dian^1,2,
LI Hong-xiang^1,2,
HUANG Run-wu^1,2,
WANG Ao^1,2,
LIU Qiang^{1,2*
,}

1.
Wuhan Institute of Main Electric Propulsion, Wuhan 430064, China
2.
Wuhan Institute of Hydrogen and Fuel Cell Industrial Technology, Wuhan 430064, China

摘要

摘要: 水下装备无空气推进(AIP)动力系统是现代海军装备中新技术、新理念层出不穷的重要研究领域。随着高隐蔽性、大潜深、长航时等战略需求的不断升级, 水下装备的尾气排放技术成为衡量各国军备水平的一项重要指标。文中概述了化学吸附法、海水洗涤法、直排消溶法以及液/固化储存法4种常规水下装备AIP动力系统尾气处理技术的基本手段、关键技术点以及发展现状, 并结合代表性AIP潜艇装置对4种尾气排放技术的原理进行了详细的阐述, 分析了各技术的优缺点及其适用范围, 指出了所应突破的关键技术点,对未来水下装备尾排处理技术的发展有一定的借鉴价值。
- 水下装备 /
- 无空气推进 /
- 尾气排放技术
Abstract: The air-independent propulsion(AIP) power system of underwater equipment is an important research field that concerns new technologies and concepts for modern naval equipment. Exhaust disposal technology for underwater equipment has become an important measure index because of the continuous upgradation of concealing ability, submersible depth, and endurance. Exhaust disposal technologies for AIP power systems of four types of conventional underwater equipment, such as chemical adsorption, seawater washing, direct dissolving discharge, and liquid/solidification storage methods, are introduced, and the key technologies as well as their development are discussed. Combined with representative AIP submarines, the advantages and disadvantages of four types of exhaust disposal technologies and their application scope are analyzed. This study may provide guidance for the rational selection of exhaust disposal technology for underwater equipment.
- underwater equipment /
- air-independent propulsion /
- exhaust disposal technology

HTML全文

参考文献(14)

[1]	聂卫东, 马玲, 张博, 等. 浅析美军水下无人作战系统及其关键技术[J]. 水下无人系统学报, 2017, 25(5): 310-318. Nie Wei-dong, Ma Ling, Zhang Bo, et al. A Brief Analysis of United States Unmanned Underwater Combat System[J]. Journal of Unmanned Undersea System, 2017, 25 (5): 310-318.
[2]	周洪举. 闭式循环柴油机排气冷却吸收系统研究[D]. 哈尔滨: 哈尔滨工程大学, 2011.
[3]	张卫东, 陈国钧. 闭式循环柴油机技术综述[J]. 海军工程大学学报, 2000, 90(1): 55-59. Zhang Wei-dong, Chen Guo-jun. A Review of Techniques in Closed-Cycle Diesel[J]. Journal of Naval University of Engineering, 2000, 90(1): 55-59.
[4]	李大鹏. 潜艇AIP装置的废气排放与处理[J]. 中外船舶科技, 2016, 106(2): 26-29. Li Da-peng. Exhaust Gas Disposal and Treatment of AIP Submarines[J]. Shipbuilding Science and Technology, 2016, 106(2): 26-29.
[5]	张延飞, 顾建良. 潜艇AIP作战使用需求分析[J]. 舰船科学技术, 1995, 17(6): 9-13. Zhang Yan-fei, Gu Jian-liang. Analysis of Operational Requirement of AIP Submarines[J]. Ship Science and Te- chnology, 1995, 17(6): 9-13.
[6]	李大鹏, 张晓东. 国外潜艇闭式循环柴油机(CCDE)装置的研究与进展[J]. 柴油机, 2012, 34 (1): 47-53. Li Da-peng, Zhang Xiao-dong. Research and Evolution of Roreign Submarine Closed-cycle Diesel(CCDE) Plant[J]. Diesel Engine, 2012, 34(1): 47-53.
[7]	周晓伟. 闭式循环柴油机废气处理单元性能研究[D]. 哈尔滨: 哈尔滨工程大学, 2014.
[8]	张小青. 旋转床吸收器性能分析及优化设计研究[D]. 哈尔滨: 哈尔滨工程大学, 2012.
[9]	张新玉. 闭式循环柴油机水管理系统应用研究[D]. 哈尔滨: 哈尔滨工程大学, 2005.
[10]	Limited C E. Apparatus for and a Method of Transferring Liquid: Europe, F 04 B 9/10[P]. 1985-05-03.
[11]	Grondin O, Chauvin J, Guillemin F, et al. Combustion Parameters Estimation and Control Using Vibration Signal: Application to the Diesel HCCI Engine[C]//2009 IEEE Conference on Decision & Control. China: IEEE, 2009.
[12]	Hauschildt P. Method for Discharging Waste Gas from Submarines without a Signature: the United States, B63H 9/10[P]. 2003-06-26.
[13]	Veguillas J L. Waste Gas Evacuator: Europe, B63G 8/12 [P]. 2006-10-16.
[14]	Lee G S, Ro S T. Analysis of the Liquefaction Process of Exhaust Gases from an Underwater Engine[J]. Applied Thermal Engineering, 1998, 18(12): 1243-1262.