鱼雷舱段振动夹具动态特性仿真分析

王红瑞; 曹小娟; 尹韶平; 张志民; 单志雄

doi:10.11993/j.issn.2096-3920.2018.06.007

鱼雷舱段振动夹具动态特性仿真分析

doi: 10.11993/j.issn.2096-3920.2018.06.007

中国船舶重工集团公司第705研究所, 陕西西安, 710077

详细信息

作者简介:
王红瑞(1985-), 男, 硕士, 主要研究方向为武器系统与运用工程.

中图分类号: TJ630.1; O329
计量
- 文章访问数: 546
- HTML全文浏览量: 2
- PDF下载量: 405
- 被引次数: 0
出版历程
- 刊出日期: 2018-12-31

Simulation Analysis on Dynamic Characteristics of Fixture for Torpedo Cabin Vibration Test

The 705 Research Institute, China Shipbuilding Industry Corporation, Xi’an 710077, China

摘要

摘要: 夹具作为鱼雷舱段振动试验系统中不可或缺的连接部件, 其动态特性直接影响振动试验的测试结果。文中针对3种鱼雷舱段振动试验夹具设计方案, 开展振动夹具动态特性的理论分析和有限元仿真, 通过数值计算其振动固有频率、振型和振动响应等, 对比分析不同振动夹具设计方案的动态性能优劣，最终确定满足鱼雷舱段振动试验传递性要求的夹具。并得出以下结论: 1) 夹具的刚度、固有频率及阻尼对其振动传递特性的影响最为突出; 2) 整体铸造成型的夹具比焊接成型和螺栓连接结构传递特性更好; 3) 基于动态特性设计的夹具能更好地保证振动能量不失真的传递。
- 鱼雷舱段 /
- 振动试验 /
- 夹具 /
- 动态特性
Abstract: The dynamic characteristics of the fixture directly affect the measurement in the vibration test of torpedo cabin. In this paper, theoretical analysis and numerical calculations of dynamic characteristics are carried out for three design schemes of fixture for torpedo cabin vibration test. The natural frequencies, vibration modes and vibration responses of the three fixture designs are calculated numerically, their dynamic performances are compared and analyzed to finally determine the right fixture, which can meet the transitivity requirement of vibration test of torpedo cabin. Conclusions are drawn as follows: 1) the stiffness, natural frequency and damping of these fixtures have the most prominent influences on their vibration transfer characteristics; 2) the monoblock cast fixture is better in the transitivity than the welded or the bolt-connected one; 3) the fixture designed on the basis of dynamic characteristics can better ensure the transmission of vibration energy without distortion.
- torpedo cabin /
- vibration test /
- fixture /
- dynamic characteristic

HTML全文

参考文献(16)

[1]	[1] 梁跃, 何长富, 彭博．鱼雷热动力发动机机体振动模态分析[J]. 鱼雷技术, 2005, 13(4): 17-20． Liang Yue, He Chang-fu, Peng Bo. Structural Vibration Modal Analysis of Torpedo Thermal Power Engine[J]. Torpedo Technology, 2005, 13(4): 17-20．
[2]	贲少愚．振动试验夹具设计[J]. 电子机械工程, 2001(4): 41-44.
[3]	郑术力, 常少莉．振动试验夹具设计研究[J]. 电子产品可靠性与环境试验, 2006, 24(5): 14-17. Zheng Shu-li, Chang Shao-li. Design of Fixture for Vibration Test[J]. Electronic Product Reliability and Environmental Testing, 2006, 24(5): 14-17.
[4]	许江文, 武艳波, 马洪斌．振动试验夹具设计及模态分析机械研究与应用[J]. 机械研究与应用, 2013, 1(26): 3-4. Xu Jiang-wen, Wu Yan-bo, Ma Hong-bin. Vibration Test Fixture Design and Modal Analysis[J]. Mechanical Research & Application, 2013, 1(26): 3-4.
[5]	于韶明, 卫国, 杨峰, 等. 振动试验夹具设计与实践[J]. 装备环境工程, 2014, 2(11): 81-86. Yu Shao-ming, Wei Guo, Yang Feng, et al. Fixture Design and Practice for Vibration Test[J]. Equipment Environmental Engineering, 2014, 2(11): 81-86.
[6]	孙忠涛, 车英. 振动试验台夹具设计及频率响应特性研究[J]. 长春理工大学学报, 2010, 33(2): 61-67. Sun Zhong-tao, Che Ying. Research on Design of Vibra-tion Fixture and Its Frequency Response Characteristic[J]. Journal of Changchun University of Science and Technology(Natural Science Edition), 2010, 33(2): 61-67.
[7]	王东升, 任万发, 刘青林, 等. 振动试验夹具共振频率设计要求研究[J]．航天器环境工程, 2014, 31(1): 37-41. Wang Dong-sheng, Ren Wan-fa, Liu Qing-lin, et al. The Design Requirements of the Resonance Frequency of Vibration Test Fixtures[J]. Spacecraft Environment Engineering, 2014, 31(1): 37-41.
[8]	姚熊亮．结构动力学[M]. 哈尔滨: 哈尔滨工程大学出版社, 2007．
[9]	曹银萍, 石秀华．基于 ANSYS 的鱼雷有限元建模与模态分析[J]．弹箭与制导学报, 2009, 29(3): 289-292． Cao Yin-ping, Shi Xiu-hua. Finite Element Modeling and Modal Analysis of Torpedo Based on ANSYS[J]. Journal of Projectiles, Rockets, Missiles and Guidance, 2009, 29(3): 289-292．
[10]	顾培英, 邓昌．结构模态分析及其损伤诊断[M]. 南京:东南大学出版社, 2008.
[11]	Singiresu S Rao. 机械振动[M]. 第5版. 北京: 清华大学出版社, 2016.
[12]	王涌泉, 雷平森, 冯睿, 等. 力学环境试验技术[M]. 西安: 西北工业大学出版社, 2003.
[13]	周桐, 王雄祥, 李健, 等. 柔性夹具动态特性对随机振动试验的影响[J]. 机械科学与技术, 2005, 24(12): 1482-1486. Zhou Tong, Wang Xiong-xiang, Li Jian, et al. Effect of Dynamic Character of Flexible Fixture to Response of Stochastic Vibration Experiment[J]. Mechanical Science and Technology, 2005, 24(12): 1482-1486.
[14]	钟继根, 王东升, 任万发, 等．某导弹发动机振动试验夹具设计[J]. 振动工程学报, 2004, 17(z2): 728-730. Zhong Ji-gen, Wang Dong-sheng, Ren Wan-fa, et al. Design of Vibration Test Fixture for a Missile Engine[J]. Journal of Vibration Engineering, 2004, 17(z2): 728-730.
[15]	王忠, 陈晖, 张铮．环境试验[M]．北京: 电子工业出版社, 2015.
[16]	Stentson K A, Palma G E. Inversion of First Perturbation Theory and Its Application to Structural Design[J]. AIAA Journal, 1976, 14(4): 454-460.