一种鱼雷楔环连接结构保障性改进设计方法

陈少强; 王红卫; 李建辰; 刘 津; 张建亭

doi:10.11993/j.issn.2096-3920.2017.04.011

一种鱼雷楔环连接结构保障性改进设计方法

doi: 10.11993/j.issn.2096-3920.2017.04.011

中国船舶重工集团公司第705研究所, 陕西西安, 710077

详细信息

作者简介:
陈少强(1981-), 男, 高级工程师, 主要研究方向为鱼雷总体技术.

中图分类号: TJ630.3; TH131.5
计量
- 文章访问数: 832
- HTML全文浏览量: 2
- PDF下载量: 572
- 被引次数: 0
出版历程
- 收稿日期: 2017-05-17
- 修回日期: 2017-07-13
- 刊出日期: 2017-10-31

An Improved Design Method of Torpedo′s Wedge Ring Connection Structure for Enhancement of Supportability

The 705 Research Institute, China Shipbuilding Industry Corporation, Xi′an 710077, China

摘要

摘要: 目前对鱼雷舱段楔环连接方式的研究均未考虑实际使用过程中的反复拆装问题, 对楔环连接结构的保障性考虑不足。针对这一问题, 根据楔环工作原理和拆装过程受力分析, 从拆装方便、提升保障能力角度, 提出了一种鱼雷楔环连接结构的改进设计方法, 并通过仿真分析、拆装试验和强度试验等对改进后的结构进行了验证。试验结果表明, 改进后的楔环连接结构在满足舱段连接强度需要的同时, 可大幅度提高楔环连接结构的保障性。
- 鱼雷 /
- 楔环连接结构 /
- 保障性 /
- 改进设计
Abstract: The existing researches on the wedge ring structures for connection of torpedo cabins do not consider assembly and disassembly in application, and pay insufficient attention to the supportability of the wedge ring structures. In this study, an improved design method of the wedge ring structure for connection of torpedo cabins was proposed according to the working principle of wedge ring. The new design takes convenient assembly and disassembly as well as enhancement of the supportability into account. Numerical simulation, assembly and disassembly test, and strength test were conducted to validate the improved design. Results show that the improved wedge ring structure meets the strength requirement of the cabin connection, and greatly improves the supportability of the wedge ring structure.
- torpedo /
- wedge ring connection strucutre /
- supportability /
- improved design

HTML全文

参考文献(15)

[1]	陆家富, 欧阳智江. 关于楔环设计的探讨[J]. 西南科技大学学报, 2015, 30(4): 71-72, 84. Lu Jia-fu, Ouyang Zhi-jiang. Discussion about the Design of Wedge-Ring[J]. Journal of Southwest University of Science and Technology, 2015, 30(4): 71-72, 84.
[2]	黄震中. 鱼雷总体设计[M]. 西安: 西北工业大学出版社, 1987.
[3]	卜广志, 宋保维, 张宇文, 等. 楔环连接的可靠性优化设计[J]. 机械科学与技术, 2000, 19(1): 57-59. Bu Guang-zhi, Song Bao-wei, Zhang Yu-wen, et a1. The Reliability Optimization of Wedge Ring Connection[J]. Mechanical Science and Technology, 2000, 19(1): 57-59.
[4]	毛昭勇, 宋保维, 胡海豹. 基于可靠性的楔环连接模糊优化设计[J]. 机械科学与技术, 2004, 23(9): 1019-1021. Mao Zhao-yong, Song Bao-wei, Hu Hai-bao. Fuzzy Optimization Design of a Wedge Ring Connection Based on Reliability[J]. Mechanical Science and Technology, 2004, 23(9): 1019-1021.
[5]	宋保维, 刘旭琳, 王鹏. 鱼雷楔环连接结构6 σ稳健优化设计[J]. 鱼雷技术, 2007, 15(5): 8-10. Song Bao-wei, Liu Xu-lin, Wang Peng. 6 σ Robust Optimization Design for Wedge Ring Connection Structure of Torpedo[J]. Torpedo Technology, 2007, 15(5): 8-10.
[6]	王鹏, 宋保维, 刘旭琳, 等. 鱼雷连接结构可靠性稳健优化设计[J]. 火力与指挥控制, 2009, 34(1): 117-119. Wang Peng, Song Bao-wei, Liu Xu-lin, et al. Robust Reliability Optimization Design for Connection Structure of Torpedo[J]. Fire Control and Command Control, 2009, 34(1): 117-119.
[7]	黄鹏, 尹益辉, 莫军. 楔环连接结构两种有限元优化设计方案研究[J]. 机械工程学报, 2006, 42(8): 205-209. Huang Peng, Yin Yi-hui, Mo Jun. Two Optimization Designs Research of Wedged-Ring Joint Structure Based on FEM[J]. Journal of Mechanical Engineering, 2006, 42(8): 205-209.
[8]	黄鹏, 莫军, 尹益辉, 等. 拉伸载荷下楔环连接壳体的应力解析方法[J]. 工程力学, 2007, 24(8): 66-71. Huang Peng, Mo Jun, Yin Yi-hui, et al. Analytic Solution for Stress in Wedged-Ring Connected Shell under Tensile Loading[J]. Engineering Mechanics, 2007, 24(8): 66-71.
[9]	刘远东, 尹益辉, 余绍蓉. 基于多目标优化的楔环连接结构尺寸设计[J]. 机械设计, 2009, 26(1): 50-52. Liu Yuan-dong, Yin Yi-hui, Yu Shao-rong. Structural Dimension Design of Wedged-Ring Linking Based on Multi-objective Optimization[J]. Machine Design, 2009, 26(1): 50-52.
[10]	尹益辉, 符春渝, 莫军. 楔环连接结构的非线性静力学行为研究[J]. 四川大学学报, 2012, 44(2): 107-109. Yin Yi-hui, Fu Chun-yu, Mo Jun. Studies on Nonlinear Mechanical Behavior of a Wedged-Ring Connector Under Static Loads[J]. Journal of Sichuan University, 2012, 44(2): 107-109.
[11]	马锐磊, 尹韶平, 曹小娟. 鱼雷楔环连接结构等效刚度建模与模态分析[J]. 舰船科学技术, 2014, 36(2): 143- 147. Ma Rui-lei, Yin Shao-ping, Cao Xiao-juan. Research on Finite Element Modeling and Modal Analysis of Torpedo′s Wedged-Ring Connection Structure[J]. Ship Science and Technology, 2014, 36(2): 143-147.
[12]	刘飞飞, 石秀华, 杜喜昭, 等. 楔环连接方式的圆柱壳体振动传递特性分析[J]. 国外电子测量技术, 2011, 30 (12): 30-33. Liu Fei-fei, Shi Xiu-hua, Du Xi-zhao, et al. Analysis on the Vibration Transfer Characteristic of the Cylindrical Shell with Wedge Ring[J]. Foreign Electronic Measurement Technology, 2011, 30(12): 30-33.
[13]	杜宏伟, 姚进, 羊海涛. 基于有限元法的楔环参数概率约束优化[J]. 中国机械工程, 2010, 21(14): 1651-1654. Du Hong-wei, Yao Jin, Yang Hai-tao. Parameter Probability Constraint Optimization of Wedged-Ring Based on FEM[J]. China Mechanical Engineering, 2010, 21(14): 1651-1654.
[14]	严海, 马锐磊, 梁跃, 等. 基于模态参数的水下航行器楔环结构有限元模型修正[J]. 鱼雷技术, 2016, 24(2): 87-93. Yan Hai, Ma Rui-lei, Liang Yue, et al. Finite Element Model Correction for Wedged-Ring Connection Structure of Underwater Vehicle Based on Modal Parameters[J]. Torpedo Technology, 2016, 24(2): 87-93.
[15]	马锐磊, 尹韶平, 曹小娟, 等. 楔环连接结构对鱼雷壳体声辐射的影响分析[J]. 鱼雷技术, 2014, 22(3): 169-173. Ma Rui-lei, Yin Shao-ping, Cao Xiao-juan, et a1. Effect of Wedged Ring Connection Structure on Noise Radiation of Torpedo Shell[J]. Torpedo Technology, 2014, 22(3): 169-173.