Simulation and Analysis on Radial Stiffness of Angular Contact Ball Bearing
-
摘要: 角接触球轴承是涡轮泵发射系统中的关键元件之一。轴承的径向支撑刚度对涡轮泵发射系统的性能有着十分重要的影响, 为了获取可靠的轴承径向支撑刚度, 以Hertz接触理论和轴承几何关系为基础, 推导了角接触球轴承径向刚度计算模型, 考虑了系统轴向预紧载荷与径向载荷的耦合作用、径向间隙和过盈量, 分析了不同因素对轴承径向刚度的非线性影响规律。文中的分析结果可为旋转机械整体分析提供参考。Abstract: Angular contact ball bearing is one of the key components in turbopump launch system, and its radial stiffness is vital for the performance of the turbopump launch system. To obtain reliable radial stiffness of the angular contact bearing, this paper derives a formulas for calculating the radial stiffness according to the Hertz contact theory and the geometrical relationship of the bearing. This formula considers the coupling of axial preload and radial load, the radial clearance, and the interference magnitude. Moreover, the nonlinear influences of different factors on the radial stiffness are analyzed. This study may provide a reference for integral analysis of rotating machine.
-
Key words:
- turbopump launch system /
- angular contact ball bearing /
- radial stiffness
-
[1] 马国华, 胡桂兰. 滚动轴承弹性接触问题的数值计算[J]. 轴承, 2005(1): 1-3.Ma Guo-hua, Hu Gui-lan. Numerical Calculation of Elastic Contact Problem of Rolling Bearings[J]. Bearings, 2005(1): 1-3. [2] Tandon N, Choudhury A. A Review of Vibration and Acoustic Measurement Methods for the Detection of Defects in Rolling Element Bearings[J]. Tribology International, 1999, 32(2): 469-480. [3] 邓四二, 贾群义, 薛进学. 滚动轴承设计原理[M]. 第2版. 北京: 中国标准出版社, 2014. [4] 罗继伟, 罗天宇. 滚动轴承分析计算与应用[M]. 北京: 机械工业出版社, 2009. [5] 陈时锦, 张春玉. 轴承刚度矩阵的解析推导与计算机求解[J]. 轴承, 2006(2): 1-4.Chen Shi-jin, Zhang Chun-yu. Analytic Deduction and Computer Solution of Bearing Stiffness[J]. Bearing, 2006(2): 1-4. [6] 杜秋华, 杨曙年. 考虑润滑和波纹度影响的球轴承径向刚度[J]. 振动与冲击, 2007, 26(10): 152-156.Du Qiu-hua, Yang Shu-nian. Radial Stiffness of Ball Bearing Considering the Influence of Lubrication and Waviness[J]. Vibration and Shock, 2007, 26(10): 152-156. [7] 钱伟长, 叶开源. 弹性力学[M]. 北京: 科学出版社, 1980. [8] Hamrock B J, Dowson. Ball Bearing Lubrication[M]. New York: John Wiley & Sons, 1981. [9] 方兵, 张雷, 曲兴田, 等. 角接触球轴承刚度理论计算与实验[J]. 吉林大学学报(工学版), 2012, 42(4): 840-844.Fang Bing, Zhang Lei, Qu Xing-tian, et al. Theoretical Calculation and Experiment of Stiffness of Angular Contact Ball Bearings[J]. Journal of Jilin University, 2012, 42(4): 840-844. [10] 邢济收, 戴曙. 预紧后角接触球轴承刚度计算[J]. 机床, 1990(5): 8-10. [11] 王硕桂, 夏源明. 过盈配合量和预紧力对高速角接触球轴承刚度的影响[J]. 中国科学技术大学学报, 2006, 36(12): 1314-1320.Wang Shuo-gui, Xia Yuan-ming. Interference Magnitude and Preload Impact the Stiffness Influence of High Speed Angle Contact Ball Bearing[J]. Journal of University of Science and Technology of China, 2006, 36(12): 1314-1320.
点击查看大图
计量
- 文章访问数: 716
- HTML全文浏览量: 0
- PDF下载量: 713
- 被引次数: 0