发射装置模拟试验承压结构的预应力模态分析

陈炜彬; 段 浩; 王 云

doi:10.11993/j.issn.2096-3920.2017.01.010

发射装置模拟试验承压结构的预应力模态分析

doi: 10.11993/j.issn.2096-3920.2017.01.010

中国船舶重工集团公司第705研究所昆明分部, 云南昆明, 650118

详细信息

作者简介:
陈炜彬(1991-), 男, 在读硕士, 主要从事鱼雷发射技术研究.

中图分类号: TJ635
计量
- 文章访问数: 1029
- HTML全文浏览量: 1
- PDF下载量: 276
- 被引次数: 0
出版历程
- 刊出日期: 2017-04-20

Prestressed Modal Analysis of Pressurized Structure for Launcher Simulation Experiment

Kunming Branch of the 705 Research Institute, China Shipbuilding Corporation, Kunming 650118, China

摘要

摘要: 发射装置模拟试验承压结构——假海在试验时受到发射冲击的作用, 会产生强烈的振动。假海的振动特性能够为测试设备的安装提供指导, 保证测试设备能安装在适当的位置。通过对假海进行预应力模态分析, 得出其模态特性没有发生明显的变化, 从而得出在预应力作用下假海没有发生明显的应力刚化。最后通过对假海固有振型的分析得出安装测试设备的最佳位置。
- 假海 /
- 预应力 /
- 模态 /
- 应力刚化
Abstract: During the launcher simulation experiment, the pressurized structure — false sea will produce strong vibration under the effect of launching shock. The vibration characteristics of the false sea can provide guidance for test equipment installation to ensure the equipment be installed in the proper position. Through prestressed modal analysis of the false sea, it is concluded that the modal characteristics do not obviously change, so no obvious stress stiffening of the false sea occurs under the effect of prestress. Finally, the optimum installation position of the test equipment is obtained through analyzing the natural vibration mode of the false sea.
- false sea /
- prestress /
- modal /
- stress stiffening

HTML全文

参考文献(10)

[1]	段浩, 李经源. 鱼雷发射技术[M]. 北京: 国防工业出版社, 2015.
[2]	王昆, 刘进福, 韩晶, 等. 基于ANSYS Workbench的焊接机器人大臂预应力模态分析[J]. 机械工程师, 2014(2): 159-160. Wang Kun, Liu Jin-fu, Han Jing, et al. Pre-stressed Modal Analysis of the Welding Robot Arm Based on ANSYS Workbench[J]. Mechanical Engineer, 2014(2): 159-160.
[3]	吴存洁, 徐杨梅, 徐小力. 基于 ANSYS Workbench 的风力发电机塔筒模态分析[J]. 机械工程与自动化, 2014 (3): 18-20. Wu Cun-jie, Xu Yang-mei, Xu Xiao-li. Modal Analysis Based on ANSYS Workbench for Wind Turbine Tower[J]. Mechanical Engineering & Automation, 2014(3): 18-20.
[4]	李吉, 于向蕾, 林祥华. 预应力对风机叶轮模态的影响[J]. 大连大学学报, 2015, 36(6): 25-27. Li Ji, Yu Xiang-lei, Lin Xiang-hua. Prestress Effects on Impeller Modal of a Fan[J]. Journal of Dalian University, 2015, 36(6): 25-27.
[5]	张岩. ANSYS Workbench 15.0有限元分析从入门到精通[M]. 北京: 机械工业出版社, 2014.
[6]	舒竞翔, 王收军, 李志伟, 等. 基于 ANSYS Work- bench 的声速剖面仪检测压力罐在预应力下的模态及谐响应分析[J]. 制造业自动化, 2014, 36(22): 88-92. Shu Jing-xiang, Wang Shou-jun, Li Zhi-wei, et al. The Pre-stressed Modal and Vibration Analysis of the Sound Velocimeter Detecting Pressure Tank Based on ANSYS Workbench[J]. Manufacturing Automation, 2014, 36(22): 88-92.
[7]	张正阳, 郑源, 张新. 预应力与水介质对轴流泵叶轮模态的影响[J]. 水电能源科学, 2015(4): 42. Zhang Zheng-yang, Zheng Yuan, Zhang Xin. Influence of Pre-stress and Aqueous Mediun on Impeller Modal of Axial-flow Pump[J]. Water Resources and Power, 2015(4): 42.
[8]	孙保苍, 李鹏飞. 考虑应力刚化影响的风力机叶片振动模态分析[J]. 可再生能源, 2012, 30(5): 38-41. Sun Bao-cang, Li Peng-fei. The Simulation Analysis of the Vibration Modal on a Wind Turbine Blade under the Stress Stiffening Effect[J]. Renewable Energy Resources, 2012, 30(5): 38-41.
[9]	曾海勇. 应力刚化及损伤对风机叶片模态参数影响研究[D]. 哈尔滨: 哈尔滨工业大学, 2011.
[10]	苏荣华, 王碧珺, 丁文文, 等. 旋转轮盘应力刚化效应对模态特性影响分析[J]. 工程设计学报, 2009, 16(4): 292-296, 307. Su Rong-hua, Wang Bi-jun, Ding Wen-wen, et al. Influence Analysis of Stress Stiffening Effect of Rotating Wheeldisc on Its Modal Characteristics[J]. Journal of Engineering Design, 2009, 16(4): 292-296, 307.