闭式循环水下动力系统壳体冷凝器设计

韩勇军; 杨赪石; 彭 博; 郭兆元; 路 骏; 马为峰; 王晋中

doi:10.11993/j.issn.1673-1948.2017.01.007

闭式循环水下动力系统壳体冷凝器设计

doi: 10.11993/j.issn.1673-1948.2017.01.007

1.
中国船舶重工集团公司第705研究所, 陕西西安 710077
2.
山西平阳机械厂代表室, 山西侯马, 043002

基金项目: 国家自然科学基金资助项目(No.61403306); 中国博士后科学基金资助项目(No.2014M552503)

详细信息

作者简介:
韩勇军(1986-), 男, 在读博士, 工程师, 主要研究方向为鱼雷热动力技术.

中图分类号: TJ630.32; TK479.12
计量
- 文章访问数: 1010
- HTML全文浏览量: 1
- PDF下载量: 427
- 被引次数: 0
出版历程
- 收稿日期: 2016-11-18
- 修回日期: 2016-12-13
- 刊出日期: 2017-02-20

Design of Shell-integrated Condenser for Underwater Power System with Closed-loop Cycle

1.
The 705 Research Institute, China Shipbuilding Industry Corporation, Xi'an 710077, China
2.
Military Representative Office, Stationed in Shanxi Pingyang Machinery Factory, Houma 043002, China

摘要

摘要: 针对闭式循环水下动力系统壳体冷凝器, 建立了壳体冷凝器设计计算数学模型, 运用MATLAB编制了壳体冷凝器的设计计算软件。通过与实际产品试验数据对比, 验证了该软件具有较高的可信度, 可为壳体冷凝器的设计开发, 优化壳体冷凝器的结构和性能, 提高设计开发效率提供数据参考。
- 水下动力系统 /
- 闭式循环 /
- 壳体冷凝器
Abstract: A mathematical model of shell-integrated condenser is established for an underwater power system with closed-loop cycle. Design and calculation software is developed for the condenser by using MATLAB. Comparing the calculations with the actual test data, it is proved that the design and calculation software is of high reliability. It can provide data reference for design-ing and developing shell-integrated condenser, optimizing structure and performance of the shell-integrated condenser, and improving efficiency of design and development.
- underwater power system /
- closed-loop /
- shell-integrated condenser

HTML全文

参考文献(11)

[1]	赵寅生. 鱼雷涡轮机原理[M]. 西安: 西北工业大学出版社, 1999.
[2]	韩勇军, 白超, 杨赪石, 等. 壳体冷凝器换热特性试验研究[J]. 鱼雷技术. 2015, 23(5): 348-352. Han Yong-jun, Bai Chao, Yang Cheng-shi, et al. Experi-mental Investigation of the Shell Condenser[J]. Torpedo Technology, 2015, 23(5): 348-352.
[3]	沈维道, 蒋智敏, 童钧耕. 工程热力学[M]. 第3版. 北京: 高等教育出版社, 2001.
[4]	余建祖. 换热器原理与设计[M]. 北京: 北京航空航天大学出版社. 2006.
[5]	Coleman J W, Garimella S. Characterization of Two-phase Flow Patterns in Small Diameter Round and Rectangular Tubes[J]. International Journal of Heat and Mass Transfer, 1999, 42(15): 2869-2881.
[6]	Chen L, Tian Y S, Karayiannis T G. The Effect of Tube Diameter on Vertical Two-phase Flow Regimes in Small tubes[J]. International Journal of Heat and Mass Transfer, 2006, 49 (21-22): 4220-4230.
[7]	杨世铭, 陶文铨. 传热学[M]. 第4版. 北京: 高等教育出版社, 2006.
[8]	Akbar M K, Plummer D A, Ghiaasiaan S M. On Gas-liquid Two-phase Flow Regimes in Microchannels[J]. International Journal of Multiphase Flow, 2003, 29(29): 855-865.
[9]	Hu J S, Chao C Y H. An Experimental Study of the Fluid Flow and Heat Transfer Characteristics in Microcondensers with Slug-Bubbly Flow[J]. International Journal of Refrigeration, 2007, 30(8): 1309-1318.
[10]	Akers W W, Deans H A, Crosser O K. Condensation Heat Transfer within Horizontal Tubes[J]. Chemical Engineering Progress Symposium Series, 1959, 55(29): 171-176.
[11]	Didi Ould M B, Kattan N, Thome J R. Prediction of Two-Phase Pressure Gradients of Refrigerants in Horizontal Tubes[J]. International Journal of Refrigeration, 2002, 25(7): 935-947.