一种发射训练系统设定应答器的设计与实现

Design and Implementation of a Setting Transponder for Torpedo Launch Training System

1.
Military Representative Office, Stationed in Shanxi Pingyang Machinery Factory, Houma 043002, China
2.
System Engineering Research Institute, China State Shipbulding Corporation, Beijing 100094, China
3.
Shanxi Pingyang Machinery Factory, Houma 043002, China

摘要: 提出了一种鱼雷发射训练设定应答器的设计方案, 并通过试验验证了该方案的有效性和可行性。该方案具有模拟准确、操作简便、可靠性高、体积小等优点, 可为其他型号产品设定应答器的设计提供参考。采用该方案的模拟训练系统不仅可以节约大量训练经费, 而且可以在低成本条件下大幅度增加演练机会, 促使新装备快速形成战斗力。
- 鱼雷 /
- 发射训练 /
- 应答器
Abstract: A design scheme of setting transponder for torpedo launch training system was proposed, and its effectiveness and feasibility were verified by experiment. The scheme has the advantages such as accurate simulation, simple operation, high reliability and small size, and may provide a reference for design of other setting transponders. Application of this scheme to simulation training system can save training cost, and can significantly increase the chance of training at low cost to promote rapid formation of fighting force for new equipment.
- torpedo /
- launch training /
- transponder

[1]	[1] 黄民效. 武器装备形成战斗力应突出抓好“四个环节”[J]. 武警指挥学院学报, 2005(12): 56-57.
[2]	李自强, 赵晋宏. 鱼雷武器快速形成战斗力训练方法探讨[J]. 鱼雷技术, 2004, 12(4): 47-49. Li Zi-qiang, Zhao Jin-hong. Discussion of Training Method in Fast Formation of Combat Effectiveness of Torpedo Weapons[J]. Torpedo Technology, 2004, 12(4): 47-49.
[3]	陈聪, 曲波. 基于ENC424J600的以太网与串行接口转换技术[J]. 单片机与嵌入式系统应用, 2012(3): 37-39. Chen Cong, Qu Bo. Ethernet and Serial Interface Coversation Technology Based on ENC424J600[J]. Microcontrollers＆ Embedded Systems, 2012(3): 37-39.
[4]	吴素农. 分布式电源控制与运行[M]. 北京: 中国电力出版社, 2012.
[5]	余卫平, 李明高. 现代车辆新能源与节能减排技术[M]. 北京: 机械工业出版社, 2014.
[6]	任喜国. 超级电容直流电源的研究[D]. 昆明: 昆明理工大学, 2013: 6-7;
[7]	曾小华, 宫维钧. ADVISOR 2002 电动汽车仿真与开发应用[M]. 北京: 机械工业出版社, 2014.
[8]	王仲东物联网的开发与应用实践[M]. 北京: 机械工业出版社, 2014.
[9]	刘玉荣. 碳材料在超级电容器中的应用[M]. 北京: 国防工业出版社, 2013.
[10]	王仲东, 黄俊桥. 物联网的开发与应用实践[M]. 北京: 机械工业出版社, 2014.
[11]	康龙云. 新能源汽车与电力电子技术[M]. 北京: 机械工业出版社, 2010.