基于Workbench响应谱分析的鱼雷振动传递优化

王 路; 尹韶平; 曹小娟; 郭 君; 郝东旭

doi:10.11993/j.issn.1673-1948.2016.01.003

基于Workbench响应谱分析的鱼雷振动传递优化

doi: 10.11993/j.issn.1673-1948.2016.01.003

1.
中国船舶重工集团公司第705研究所, 陕西西安, 710077
2.
水下信息与控制重点实验室, 陕西西安, 710077
3.
中国人民解放军92840部队, 山东青岛, 266405

详细信息

作者简介:
王路(1991-), 男, 在读硕士, 主要研究方向为鱼雷总体技术.

中图分类号: TJ630
计量
- 文章访问数: 1103
- HTML全文浏览量: 1
- PDF下载量: 849
- 被引次数: 0
出版历程
- 收稿日期: 2015-09-02
- 修回日期: 2015-10-19
- 刊出日期: 2016-02-20

Vibration Transfer Optimization of Torpedo Based on Workbench Response Spectrum

1.
The 705th Research Institute, China Shipbuilding Industry Corporation, Xi’an 710077, China
2.
Science and Technology on Underwater Information and Control Laboratory, Xi’an 710077, China
3.
92840th Unit, The People′s Liberation Army of China, Qingdao 266405, China

摘要

摘要: 在鱼雷方案设计阶段, 为降低结构振动传递响应, 优化设计参数, 采用有限元法, 建立了基于Work- bench的鱼雷结构参数化等效模型。以某型鱼雷为例进行全雷结构响应谱分析, 以减小振动传递响应为目标, 优化等效集中质量、壳体厚度、矩形截面加强筋尺寸等结构设计参数。仿真结果表明, 该参数化等效模型能有效仿真鱼雷结构振动传递特性, 结构经优化后自导头段振动传递响应有所降低。
- 鱼雷 /
- 振动传递 /
- 响应谱分析 /
- 优化设计 /
- 有限元分析
Abstract: For reducing structural vibration transfer response and optimizing design parameters in the scheme design phase of a torpedo, finite element analysis is employed to establish a parameterized equivalent model of torpedo structure based on Workbench. Response spectrum analysis is conducted for the shell of a certain type torpedo. The design parameters, like equivalent concentration of mass, shell thickness, and size of reinforcing rib with rectangular cross section, are optimized to reduce the vibration transfer response. Simulation results show that this parameterized equivalent model can effectively simulate the characteristic of structural vibration transfer of a torpedo, and the vibration transfer response of the homing head cabin decreases after optimization.
- torpedo /
- vibration transfer /
- response spectrum analysis /
- optimization design /
- finite element analysis(FEA)

HTML全文

参考文献(6)

[1]	尹韶平, 刘瑞生. 鱼雷总体技术[M]. 北京: 国防工业出版社, 2011.
[2]	曹银萍, 石秀华. 基于ANSYS的鱼雷有限元建模与模态分析[J]. 弹箭与指导学报, 2009, 29(3): 289-292. Cao Yin-ping, Shi Xiu-hua. Finite Element Modeling and Modal Analysis of Torpedo Based on ANSYS[J]. Journal of Projectiles, Rockets, Missiles and Guidance, 2009, 29 (3): 289-292.
[3]	张宇文. 鱼雷总体设计原理与方法[M]. 西安: 西北工业大学出版社, 1995.
[4]	刘飞飞, 石秀华, 杜喜昭, 等. 楔环联接方式的圆柱壳体振动传递特性分析[J]. 国外电子测量技术, 2011, 30 (12): 30-33. Liu Fei-fei, Shi Xiu-hua, Du Xi-zhao, et al. Analysis on the Vibration Transfer Characteristic of the Cylindrical Shell with Wedge Ring[J]. Foreign Electronic Measurement Technology, 2011, 30 (12): 30-33.
[5]	马锐磊, 尹韶平, 曹小娟, 等. 鱼雷楔环连接结构等效刚度建模与模态分析[J]. 舰船科学技术, 2014, 36(2): 143-147. Ma Rui-lei, Yin Shao-ping, Cao Xiao-juan, et al. Research on Finite Element Modeling and Modal Analysis of Torpedo?s Wedged-ring Connection Structure[J]. Ship Science and Technology, 2014, 36(2): 143-147.
[6]	凌贵龙. ANSYS Workbench 13.0从入门到精通[M]. 北京: 清华大学出版社, 2012.