推拉缸式鱼雷发射装置内弹道仿真

郭 煜; 李宗吉; 任 蕾; 练永庆

doi:10.11993/j.issn.1673-1948.2015.05.015

推拉缸式鱼雷发射装置内弹道仿真

doi: 10.11993/j.issn.1673-1948.2015.05.015

1.
海军工程大学兵器新技术应用研究所, 湖北武汉, 430033
2.
海军工程大学装备经济管理系, 湖北武汉, 430033

详细信息

作者简介:
郭煜(1990-), 男, 在读硕士, 研究方向为水中兵器动力与推进技术.

中图分类号: TJ635
计量
- 文章访问数: 1191
- HTML全文浏览量: 3
- PDF下载量: 356
- 被引次数: 0
出版历程
- 刊出日期: 2015-10-20

Simulation on Interior Ballistics of Push-Pull Cylinder Type Torpedo Launcher

1.
Naval Research Institute of New Weaponry Technology & Application, Naval University of Engineering, Wuhan 430033, China
2.
Equipment Department of Economic Management, Naval University of Engineering, Wuhan 430033, China

摘要

摘要: 为了使体积、质量相对较小的无人水下航行器(UUV)具有水下发射鱼雷的能力, 在传统水下鱼雷发射装置的基础上进行改进, 提出了一种适应UUV水下发射鱼雷的推拉缸式鱼雷发射装置方案。建立了发射装置内弹道数学模型。通过仿真计算, 得到该型发射装置主要结构参数对推拉缸式内弹道的影响规律。仿真结果表明, 该方案满足UUV水下发射鱼雷的相关技术指标, 为进一步研制开发提供参考。
- 鱼雷发射装置 /
- 无人水下航行器(UUV) /
- 推拉缸式 /
- 内弹道
Abstract: To make an underwater unmanned vehicle(UUV), which is small in volume and light in weight, has the ability of launching a torpedo, a scheme of push-pull cylinder type torpedo launcher for an UUV is proposed on the basis of traditional torpedo launcher. And a mathematic model of interior ballistics is built for the launcher to simulate the influences of main structural parameters on the interior ballistics of the push-pull cylinder type torpedo launcher. Simulation shows that this scheme meets the technical requirements for the UUV launching a torpedo. This study may provide a reference for further research of this topic.
- torpedo launcher /
- underwater unmanned vehicle(UUV) /
- push-pull cylinder type /
- interior ballistics

HTML全文

参考文献(9)

[1]	王树宗, 王一中. 海军舰艇武器装备概论[M]. 北京: 兵器工业出版社, 1995.
[2]	王蓬. 军用UUV的发展与应用前景展望[J]. 鱼雷技术, 2009, 17(2): 5-9. Wang Peng. Development of Military UUV and Application Prospect Forecast[J]. Torpedo Technology, 2009, 17(2): 5-9.
[3]	许韦韦, 孟昭香. 新兴水下作战平台UUV[J]. 指挥控制与仿真, 2006, 28(3): 16-19. Xu Wei-wei, Meng Zhao-xiang. UUV, the Rising Under-water Operation Platform[J]. Command Control & Simulation, 2006, 28(3): 16-19.
[4]	朱清浩, 宋汝刚. 美国潜艇鱼雷发射装置使用方式初探[J]. 鱼雷技术, 2012, 20(3): 215-219. Zhu Qing-hao, Song Ru-gang. The U.S. Submarine Torpedo Launcher to Use Way[J]. Torpedo Technology, 2012, 20(3): 215-219.
[5]	练永庆, 王树宗. 鱼雷发射装置设计原理[M]. 北京: 国防工业出版社, 2012.
[6]	张孝芳, 王树宗, 练永庆．气动水压式水下武器发射系统建模与仿真[J]. 系统仿真学报, 2009, 21(10): 3092- 3095. Zhang Xiao-fang, Wang Shu-zong, Lian Yong-qing. Modeling and Simulation of Pneumatic and Hydraulic Underwater Weapon Launching System[J]. Journal of System Simulation, 2009, 21(10): 3092-3095.
[7]	王树宗, 练永庆, 陈一雕. 气动式水下武器发射装置内弹道数学模型[J]. 弹道学报, 2003, 15(1): 21-26. Wang Shu-zong, Lian Yong-qing, Chen Yi-diao. The Mathemaitc Model of the Underwater Compressed-air Launcher[J]. Journal of Ballistics, 2003, 15(1): 21-26.
[8]	田兵, 王树宗, 练永庆. 液压蓄能式鱼雷发射装置内弹道建模与仿真[J]. 鱼雷技术, 2011, 19(1): 68-71. Tian Bing, Wang Shu-zong, Lian Yong-qing. Hydraulic Energy Storage Type Torpedo Launcher Interior Ballistic Modeling and Simulation[J]. Torpedo Technology, 2011, 19(1): 68-71.
[9]	蔡荣泉. 船舶计算流体力学的发展与应用[J]. 船舶, 2002(4): 8-13. Cai Rong-quan. Development and application of Computational Fluid Dynamics[J]. Ship & Boat, 2002(4): 8-13.