一种微型部分进气冲动式涡轮机设计方法

蒋 彬; 罗 凯; 高爱军; 封启玺; 伊进宝

doi:10.11993/j.issn.1673-1948.2015.05.007

一种微型部分进气冲动式涡轮机设计方法

doi: 10.11993/j.issn.1673-1948.2015.05.007

1.
西北工业大学航海学院, 陕西西安, 710072
2.
中国船舶重工集团公司第705研究所, 陕西西安, 710075

基金项目: 国家自然科学基金项目(51409215); 中央高校基本科研项目(G2015KY0102)

详细信息

作者简介:
蒋彬(1991-), 男, 硕士, 主要研究方向为水下涡轮机的设计与仿真.

中图分类号: TJ630.32
计量
- 文章访问数: 1152
- HTML全文浏览量: 2
- PDF下载量: 494
- 被引次数: 0
出版历程
- 收稿日期: 2015-05-27
- 修回日期: 2015-06-08
- 刊出日期: 2015-10-20

A Design Approach of Micro Partial Admission Impusle Turbine

1.
School of Marine Science and Technology, Northwestern Polytechnical University, Xi'an 710072, China
2.
The 705 Research Institute, China Shipbuilding Industry Corporation, Xi'an 710075, China

摘要

摘要: 为弥补水下航行器微型部分进气冲动式涡轮机的设计缺陷，通过分析微型涡轮机的损失特性提出了一种微型水下涡轮机的设计方法，运用数值方法进行了方法合理性检验及变工况特性研究，并开展了实例设计。研究结果表明，所设计涡轮机的仿真内效率与设计值误差在3%以内；大背压下涡轮机叶栅和机匣能有效抑制喷管出口气流的分离；非设计转速下工质对叶栅的冲击损失会增大；通过调节喷管个数可满足较大范围内输出功率的需求。该方法可为微型部分进气冲动式涡轮机的优化设计和试验提供参考。
- 微型冲动式涡轮机 /
- 部分进气 /
- 设计方法 /
- 变工况 /
- 内效率
Abstract: For improving the current design method of micro partial admission impulse turbine, a design approach of the micro partial admission turbine is proposed by analyzing the micro turbine’s loss characteristics. In addition, the rationality of the design approach is examined numerically, the variable working conditions are investigated, and the prototype is designed. The results indicate that the error of the designed turbine’s inner efficiency between simulation results and the design parameters is less than 3%; the blade cascade and the shroud can suppress the flow separation at the nozzle’s outlet under a big ambient pressure; the impact loss on the blade cascade increases under off-designed rotational speeds; the turbine can gain larger output power by changing nozzle number. The design method can provide a reference for the optimization design and test of the micro turbine.
- micro impulse turbine /
- partial admission /
- design approach /
- variable working condition /
- inner efficiency

HTML全文

参考文献(10)

[1]	赵寅生, 钱志博. 鱼雷涡轮机原理[M]. 西安: 西北工业大学出版社, 2002.
[2]	Kiely D H, Moore J T. Hydrocarbon Fueled UUV Power Systems[C]//Proceedings of the 2002 Workshop on Autonomous Underwater Vehicles, San Antonio: IEEE, 2002.
[3]	Louisos W F, Hitt D L. Supersonic Micro-nozzles[M] //Encyclopedia of Microfluidics and Nanofluidics. US: Springer, 2014: 1-18.
[4]	李军. 部分进气度的变化对多级轴流透平性能的影响[J]. 燃气轮机技术, 2006, 19(2): 47-48. Li Jun. The Effect of Admission Change on Multistage Ax- ial Turbine[J]. Gas Turbine Technology, 2006, 19(2): 47-48.
[5]	刘广涛, 黄洪雁, 王祥锋, 等. 大膨胀比涡轮机三维非定常数值计算研究[J]. 汽轮机技术, 2012(6): 425-428. Liu Guang-tao, Huang Hong-yan, Wang Xiang-feng, et al. 3D Unsteady Numerical Investigation on Flow Field of Large Pressure Ratio Turbine[J]. Turbine Technology, 2012(6): 425-428.
[6]	伊进宝, 赵卫兵, 师海潮, 等. 鱼雷涡轮机斜切喷管内流场数值模拟[J]. 鱼雷技术, 2010, 18(3): 223-227. Yi Jin-bao, Zhao Wei-bing, Shi Hai-chao, et al. Numerical Simulation of Flow Field in Scarfed Nozzle of Torpedo Turbine[J]. Torpedo Technology, 2010, 18(3): 223-227.
[7]	郭兆元, 曹浩, 赵卫兵. 纯冲动式鱼雷涡轮机动叶栅超音速流动数值仿真[J]. 鱼雷技术, 2013, 21(1): 43-47. Guo Zhao-yuan, Cao Hao, Zhao Wei-Bing. Numerical Simulation of Supersonic Flow Field in Rotor Blade Cascade for Impulse Torpedo Turbine[J]. Torpedo Technology, 2013, 21(1): 43-47.
[8]	韩勇军, 杨赪石, 彭博. 涡轮机动力系统变工况过程内效率建模与仿真[J]. 鱼雷技术, 2009, 17(5): 58-62. Han Yong-jun, Yang Cheng-shi, Peng Bo. Modeling and Simulation of Inner Eficiency in Non-Design Condition for Torpedo Turbine[J]. Torpedo Technology, 2009, 17(5): 58-62.
[9]	张方方, 张振山, 梁伟阁, 等. 水下蒸汽涡轮发动机变工况热力特性数值分析研究[J]. 兵工学报, 2014, 35(9): 1466-1472. Zhang Fang-fang, Zhang Zhen-shan, Liang Wei-ge, et al. Numerical Analysis on Thermal Characteristics of Underwater Stream Turbine in Non-Design Condition[J]. Acta Armamentarii, 2014, 35(9): 1466-1472.
[10]	蒋彬, 罗凯, 高爱军. 水下冲动式涡轮机斜喷管设计新方法[J]. 鱼雷技术, 2015, 23(4): 296-300. Jiang Bin, Luo Kai, Gao Ai-jun. Design Approach of Scarfed Nozzle in Underwater Impulse Turbine[J]. Torpedo Technology, 2015, 23(4): 296-300.