基于SolidWorks Simulation的新型鱼雷支架优化设计

吴应东

doi:10.11993/j.issn.1673-1948.2014.04.003

基于SolidWorks Simulation的新型鱼雷支架优化设计

doi: 10.11993/j.issn.1673-1948.2014.04.003

吴应东

昆明船舶设备研究实验中心, 云南昆明, 650051

详细信息

作者简介:
吴应东(1987-), 男, 硕士, 助理工程师, 主要研究方向为机械设计理论及方法.

中图分类号: TJ630; TP391.9
计量
- 文章访问数: 1179
- HTML全文浏览量: 3
- PDF下载量: 587
- 被引次数: 0
出版历程
- 收稿日期: 2014-03-21
- 修回日期: 2014-03-31
- 刊出日期: 2014-08-20

Optimization Design of New Type Torpedo Rack Based on SolidWorks Simulation

WU Ying-dong

Kunming Shipborne Equipment Research & Test Center, Kunming 650051,China

摘要

摘要: 针对传统鱼雷支架制作成本较高、占地面积大、不利于搬运等缺点, 基于SolidWorks设计了一种可插拔式堆叠的新型鱼雷支架, 该雷架采用注塑成型, 在保证支架强度的同时, 可极大简化支架的加工程序并降低成本, 使其占地面积降至原有的1/10以下。同时基于SolidWorks Simulation插件完成该支架有限元分析以及结构优化, 优化结果进一步证明了该设计方案的可行性。
- 鱼雷支架 /
- 可插拔式 /
- 堆叠 /
- SolidWorks /
- 优化设计
Abstract: The structure of conventional torpedo rack has the disadvantages of high cost, large volume, and inconvenient movement. Therefore, a new type of pluggable and stackable rack is designed for a torpedo based on the software SolidWorks Simulation. This new rack is made with injection molding technology to decrease the cost, simplify the machining process, and reduce its covering area to less than 1/10 of original one without the decrease in its strength. Moreover, optimization design and finite element analysis of the new torpedo rack are conducted based on SolidWorks Simulation. The final design reduces the volume of mold and the raw materials, and the strength of the new type of tor-pedo rack is enhanced.
- torpedo rack /
- pluggable /
- stackable /
- SolidWorks Simulation /
- optimization design

HTML全文

参考文献(8)

[1]	贾红雨, 李成, 杨洁, 等. 复合材料储能飞轮转子有限元分析[J]. 玻璃钢/复合材料, 2009, 207(4): 35-38. Jia Hong-yu, Li Cheng, Yang Jie, et al. Finite Element Analysis on Composite Energy Storage Flywheel[J]. Fiber Reinforced Plastics/Composites, 2009, 207(4): 35-38.
[2]	Ireland R C, Torres C R. Finite Element Modeling of a Circumferential Magnetiser[J]. Sensors and Actuators, 2006, 129(1-2): 197-202.
[3]	殷波. 玻璃钢信号灯架的有限元分析与应用[J]. 玻璃钢/复合材料, 2009, 207(4): 74-76. Yin Bo. Finite Element Analysis on Gfrp Traffic Light Frame[J]. Fiber Reinforced Plastics/Composites, 2009, 207 (4): 74-76.
[4]	黄旌, 高涛. ANSYS用于机翼有限元分析的建模研究[J]. 红河学院学报, 2006, 4(2): 8-11. Huang Jing, Gao Tao. A Modeling Research of the Wing Finite Element Analysis with ANSYS[J]. Journal of Honghe University, 2006, 4(2): 8-11.
[5]	陈永当, 鲍志强, 任慧娟, 等. 基于SolidWorks Simu- lation的产品设计有限元分析[J]. 计算机技术与发展, 2012, 22(9): 177-180. Chen Yong-dang, Bao Zhi-qiang, Ren Hui-juan, et al. Finite Element Analysis Product Design Based on Solid- Works Simulation[J]. Computer Technology and Develop- ment, 2012, 22(9): 177-180.
[6]	叶勇, 朱若艳. 基于有限元分析的结构优化设计方法[J]. 机械, 2004, 31(11): 18-20. Ye Yong, Zhu Ruo-yan. Structure Optimization Design Based on Finite Element Analysis[J]. Machinery, 2004, 31 (11): 18-20.
[7]	范鸣玉, 张莹. 最优化技术基础[M]. 北京: 清华大学出版社, 1982: 10-11.
[8]	陈永当, 任慧娟, 武欣竹. 基于SolidWorks Simulation的有限元分析方法[J]. CAD/CAM与制造业信息化, 2011(9): 48-51. Chen Yong-dang, Ren Hui-juan, Wu Xin-zhu. Finite Element Analysis Based on SolidWorks Simulation[J]. Digital Manufacturing Industry, 2011(9): 48-51.