Numerical Simulation of Conjugate Forced Convection in Torpedo Tube with Torpedo and Al/AgO Battery
-
摘要: 为分析鱼雷发射失效后Al/AgO电池在发射管中的热安全性,基于计算流体力学方法,应用计算流体力学软件FLUENT,对鱼雷发射失效后Al/AgO一次电池激活情况下管内强制对流耦合传热进行了数值模拟。考虑了电解液与鱼雷壳体、鱼雷壳体与发射管内海水的对流耦合换热,得到了电解液的温度变化规律以及鱼雷壳体和发射管体上的温度分布规律。仿真结果表明,电池内温度随时间的变化逐渐升高,其最高温度可达107.5℃.Abstract: To analyze the thermal safety of Al/AgO battery in torpedo tube after launching failure, numerical simulation of the conjugate forced convection heat transfer was conducted in the condition of launch failure and battery activation by using the computational fluid dynamics(CFD) software FLUENT. Taking into account the conjugate heat transfer between electrolyte and torpedo shell as well as between torpedo shell and sea water inside the tube, the time histories of the electrolyte temperature and the temperature contour on torpedo shell and tube were obtained. Simulation results show that the temperature in the battery becomes higher with time, and the maximum temperature is 107.5 ℃.
-
[1] Lannot MP,d’Ussel L,Hastings J.Comparison of Aluminum Silver Oxide and Lithium Oxyhalide Batteries Performances for Underwater Weapons-propulsion[J].Proceedings of the 34th International Power Sources Symposium,1990:112-114. [2] 蔡年生.铝/氧化银鱼雷动力电池的安全性分析[J].鱼雷技术,1998,6(1):5-9. [3] FLUENT Inc. FLUENT User Guide[M].2006. [4] 陶文铨,数值传热学[M].陕西:西安交通大学出版社,2001. [5] 陈维汉,传热学[M].湖北:武汉理工大学出版社,2004.
点击查看大图
计量
- 文章访问数: 2027
- HTML全文浏览量: 1
- PDF下载量: 904
- 被引次数: 0